700258 Blower Motor for HYUNDAI
Primary OE reference: 700258
Cross-reference 1: 97113D5000
Product type: Automotive HVAC Blower Motor
Applicable vehicle: HYUNDAI
Brand: HYUNDAI
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
700258 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 700258 for application-led sourcing.
For catalogue item 6202-062, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6202-062 when comparing this 700258 airflow configuration.
OE Reference and Application
The primary catalogue number is 700258. The recorded application is HYUNDAI. For 6202-062, Measure the 700258 wheel height and outer diameter, then compare the electrical socket and base contour with the 700258 product photos. Record 6202-062 with the approved OE reference.
HVAC Interface and 700258 installation
During work on 6202-062, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 700258 installation. Recheck 6202-062 before the lower trim is closed.
For item 6202-062, confirm that the 700258 centrifugal wheel clears its housing and that the 6202-062 connector lock engages without force. After seating 6202-062, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6202-062.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 700258 |
| Cross-reference numbers | 97113D5000 |
| Vehicle brand | HYUNDAI |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 700258 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6202-062, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6202-062 record remains the picking reference.
For trade item 6202-062, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6202-062 on the packing instruction.
Frequently Asked Questions
How should item 6202-062 and blower number 700258 be verified?
Match 6202-062 to the complete 700258 marking, then compare the 6202-062 plug, terminal count, mounting flange and wheel dimensions with the removed HYUNDAI unit.
Can 6202-062 have more than one vehicle-side blower configuration?
Yes. HYUNDAI production changes can affect 6202-062; confirm steering position, climate-control specification and the original 6202-062 geometry before approval.
What circuit checks are useful when 6202-062 does not operate?
For 6202-062, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6202-062 motor again.
Which details should accompany a wholesale request for 6202-062?
Provide item 6202-062, OE 700258, the stated application, quantity and destination; add 6202-062 carton or private-label requirements separately.
How can noise be avoided after fitting 6202-062?
Clear debris from the air inlet, check that the 6202-062 wheel turns freely, seat the 6202-062 flange evenly and keep wiring away from the impeller.
Request a quote for 6202-062: Send 700258, the 6202-062 application and required quantity for a fitment and supply review.
