700025 Blower Motor for FORD Windstar
Primary OE reference: 700025
Cross-reference 1: 615-00590
Cross-reference 2: 330-58016-100
Cross-reference 3: XF2Z19805EA
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD Windstar
Brand: FORD
Model: Windstar
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
700025 Automotive Blower Motor Overview
Reference 700025 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6203-124, the 700025 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-124 when comparing this 700025 airflow configuration.
OE Reference and Application
The primary catalogue number is 700025. The recorded application is FORD Windstar. For 6203-124, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6203-124 with the approved OE reference.
HVAC Interface and 700025 installation
During work on 6203-124, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-124 before the lower trim is closed.
For item 6203-124, confirm that the 700025 centrifugal wheel clears its housing and that the 6203-124 connector lock engages without force. After seating 6203-124, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-124.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 700025 |
| Cross-reference numbers | 615-00590 / 330-58016-100 / XF2Z19805EA |
| Vehicle brand | FORD |
| Vehicle model | Windstar |
| Model year | Confirm by OE reference |
| 700025 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-124, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-124 record remains the picking reference.
For trade item 6203-124, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-124 on the packing instruction.
Frequently Asked Questions
How should item 6203-124 and blower number 700025 be verified?
Match 6203-124 to the complete 700025 marking, then compare the 6203-124 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-124 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-124; confirm steering position, climate-control specification and the original 6203-124 geometry before approval.
What circuit checks are useful when 6203-124 does not operate?
For 6203-124, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-124 motor again.
Which details should accompany a wholesale request for 6203-124?
Provide item 6203-124, OE 700025, the stated application, quantity and destination; add 6203-124 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-124?
Clear debris from the air inlet, check that the 6203-124 wheel turns freely, seat the 6203-124 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-124: Send 700025, the 6203-124 application and required quantity for a fitment and supply review.
