6Q1820015 Blower Motor for VOLKSWAGEN Polo
Primary OE reference: 6Q1820015
Product type: Automotive HVAC Blower Motor
Applicable vehicle: VOLKSWAGEN Polo
Brand: VOLKSWAGEN
Model: Polo
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6Q1820015 Automotive Blower Motor Overview
The 6Q1820015 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6220-028, When the climate-control circuit commands 6Q1820015 airflow, the electric motor rotates the 6Q1820015 fan wheel inside the HVAC housing. Use 6220-028 when comparing this 6Q1820015 airflow configuration.
OE Reference and Application
The primary catalogue number is 6Q1820015. The recorded application is VOLKSWAGEN Polo. For 6220-028, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6220-028 with the approved OE reference.
HVAC Interface and 6Q1820015 installation
During work on 6220-028, If 6Q1820015 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 6Q1820015 motor is the only cause. Recheck 6220-028 before the lower trim is closed.
For item 6220-028, confirm that the 6Q1820015 centrifugal wheel clears its housing and that the 6220-028 connector lock engages without force. After seating 6220-028, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6220-028.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6Q1820015 |
| Cross-reference numbers | 6Q1820015 |
| Vehicle brand | VOLKSWAGEN |
| Vehicle model | Polo |
| Model year | Confirm by OE reference |
| 6Q1820015 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6220-028, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6220-028 record remains the picking reference.
For trade item 6220-028, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6220-028 on the packing instruction.
Frequently Asked Questions
How should item 6220-028 and blower number 6Q1820015 be verified?
Match 6220-028 to the complete 6Q1820015 marking, then compare the 6220-028 plug, terminal count, mounting flange and wheel dimensions with the removed VOLKSWAGEN unit.
Can 6220-028 have more than one vehicle-side blower configuration?
Yes. VOLKSWAGEN production changes can affect 6220-028; confirm steering position, climate-control specification and the original 6220-028 geometry before approval.
What circuit checks are useful when 6220-028 does not operate?
For 6220-028, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6220-028 motor again.
Which details should accompany a wholesale request for 6220-028?
Provide item 6220-028, OE 6Q1820015, the stated application, quantity and destination; add 6220-028 carton or private-label requirements separately.
How can noise be avoided after fitting 6220-028?
Clear debris from the air inlet, check that the 6220-028 wheel turns freely, seat the 6220-028 flange evenly and keep wiring away from the impeller.
Request a quote for 6220-028: Send 6Q1820015, the 6220-028 application and required quantity for a fitment and supply review.
