6441EW Blower Motor for PEUGEOT 508
Primary OE reference: 6441EW
Cross-reference 1: VAL515141
Cross-reference 2: 478842
Cross-reference 3: NN107860A
Cross-reference 4: PE8421
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT 508
Brand: PEUGEOT
Model: 508
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6441EW Automotive Blower Motor Overview
The 6441EW record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6204-068, When the climate-control circuit commands 6441EW airflow, the electric motor rotates the 6441EW fan wheel inside the HVAC housing. Use 6204-068 when comparing this 6441EW airflow configuration.
OE Reference and Application
The primary catalogue number is 6441EW. The recorded application is PEUGEOT 508. For 6204-068, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6204-068 with the approved OE reference.
HVAC Interface and 6441EW installation
During work on 6204-068, If 6441EW airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 6441EW motor is the only cause. Recheck 6204-068 before the lower trim is closed.
For item 6204-068, confirm that the 6441EW centrifugal wheel clears its housing and that the 6204-068 connector lock engages without force. After seating 6204-068, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-068.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6441EW |
| Cross-reference numbers | VAL515141 / 478842 / NN107860A / PE8421 |
| Vehicle brand | PEUGEOT |
| Vehicle model | 508 |
| Model year | Confirm by OE reference |
| 6441EW installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-068, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-068 record remains the picking reference.
For trade item 6204-068, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-068 on the packing instruction.
Frequently Asked Questions
How should item 6204-068 and blower number 6441EW be verified?
Match 6204-068 to the complete 6441EW marking, then compare the 6204-068 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-068 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-068; confirm steering position, climate-control specification and the original 6204-068 geometry before approval.
What circuit checks are useful when 6204-068 does not operate?
For 6204-068, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-068 motor again.
Which details should accompany a wholesale request for 6204-068?
Provide item 6204-068, OE 6441EW, the stated application, quantity and destination; add 6204-068 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-068?
Clear debris from the air inlet, check that the 6204-068 wheel turns freely, seat the 6204-068 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-068: Send 6441EW, the 6204-068 application and required quantity for a fitment and supply review.
