6441.T8 Blower Motor for PEUGEOT 307
Primary OE reference: 6441.T8
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT 307
Brand: PEUGEOT
Model: 307
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6441.T8 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 6441.T8 to support OE-number comparison before purchase.
For catalogue item 6204-048, Cabin 6441.T8 airflow depends on the 6441.T8 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6204-048 when comparing this 6441.T8 airflow configuration.
OE Reference and Application
The primary catalogue number is 6441.T8. The recorded application is PEUGEOT 307. For 6204-048, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6204-048 with the approved OE reference.
HVAC Interface and 6441.T8 installation
During work on 6204-048, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6204-048 before the lower trim is closed.
For item 6204-048, confirm that the 6441.T8 centrifugal wheel clears its housing and that the 6204-048 connector lock engages without force. After seating 6204-048, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-048.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6441.T8 |
| Cross-reference numbers | 6441.T8 |
| Vehicle brand | PEUGEOT |
| Vehicle model | 307 |
| Model year | Confirm by OE reference |
| 6441.T8 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-048, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-048 record remains the picking reference.
For trade item 6204-048, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-048 on the packing instruction.
Frequently Asked Questions
How should item 6204-048 and blower number 6441.T8 be verified?
Match 6204-048 to the complete 6441.T8 marking, then compare the 6204-048 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-048 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-048; confirm steering position, climate-control specification and the original 6204-048 geometry before approval.
What circuit checks are useful when 6204-048 does not operate?
For 6204-048, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-048 motor again.
Which details should accompany a wholesale request for 6204-048?
Provide item 6204-048, OE 6441.T8, the stated application, quantity and destination; add 6204-048 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-048?
Clear debris from the air inlet, check that the 6204-048 wheel turns freely, seat the 6204-048 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-048: Send 6441.T8, the 6204-048 application and required quantity for a fitment and supply review.
