6441.J5 Blower Motor for PEUGEOT Partner
Primary OE reference: 6441.J5
Cross-reference 1: 6441.N4
Cross-reference 2: 6441.K5
Cross-reference 3: DEA07015
Cross-reference 4: 698327
Cross-reference 5: 87130
Cross-reference 6: KM3574
Product type: Automotive HVAC Blower Motor
Applicable vehicle: PEUGEOT Partner
Brand: PEUGEOT
Model: Partner
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6441.J5 Automotive Blower Motor Overview
This listing links 6441.J5 with the supplied blower-motor geometry, connector and application information.
For catalogue item 6204-018, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6204-018 when comparing this 6441.J5 airflow configuration.
OE Reference and Application
The primary catalogue number is 6441.J5. The recorded application is PEUGEOT Partner. For 6204-018, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6204-018 with the approved OE reference.
HVAC Interface and 6441.J5 installation
During work on 6204-018, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 6441.J5 installation. Recheck 6204-018 before the lower trim is closed.
For item 6204-018, confirm that the 6441.J5 centrifugal wheel clears its housing and that the 6204-018 connector lock engages without force. After seating 6204-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6441.J5 |
| Cross-reference numbers | 6441.N4 / 6441.K5 / DEA07015 / 698327 / 87130 / KM3574 |
| Vehicle brand | PEUGEOT |
| Vehicle model | Partner |
| Model year | Confirm by OE reference |
| 6441.J5 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-018, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6204-018 record remains the picking reference.
For trade item 6204-018, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6204-018 on the packing instruction.
Frequently Asked Questions
How should item 6204-018 and blower number 6441.J5 be verified?
Match 6204-018 to the complete 6441.J5 marking, then compare the 6204-018 plug, terminal count, mounting flange and wheel dimensions with the removed PEUGEOT unit.
Can 6204-018 have more than one vehicle-side blower configuration?
Yes. PEUGEOT production changes can affect 6204-018; confirm steering position, climate-control specification and the original 6204-018 geometry before approval.
What circuit checks are useful when 6204-018 does not operate?
For 6204-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-018 motor again.
Which details should accompany a wholesale request for 6204-018?
Provide item 6204-018, OE 6441.J5, the stated application, quantity and destination; add 6204-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-018?
Clear debris from the air inlet, check that the 6204-018 wheel turns freely, seat the 6204-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-018: Send 6441.J5, the 6204-018 application and required quantity for a fitment and supply review.
