6441.96 Blower Motor for CITROEN Saxo
Primary OE reference: 6441.96
Cross-reference 1: 698044
Cross-reference 2: 34099
Cross-reference 3: 730014N
Cross-reference 4: CN8509
Product type: Automotive HVAC Blower Motor
Applicable vehicle: CITROEN Saxo
Brand: CITROEN
Model: Saxo
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
6441.96 Automotive Blower Motor Overview
Reference 6441.96 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6204-013, the 6441.96 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6204-013 when comparing this 6441.96 airflow configuration.
OE Reference and Application
The primary catalogue number is 6441.96. The recorded application is CITROEN Saxo. For 6204-013, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6204-013 with the approved OE reference.
HVAC Interface and 6441.96 installation
During work on 6204-013, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6204-013 before the lower trim is closed.
For item 6204-013, confirm that the 6441.96 centrifugal wheel clears its housing and that the 6204-013 connector lock engages without force. After seating 6204-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6204-013.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 6441.96 |
| Cross-reference numbers | 698044 / 34099 / 730014N / CN8509 |
| Vehicle brand | CITROEN |
| Vehicle model | Saxo |
| Model year | Confirm by OE reference |
| 6441.96 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6204-013, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6204-013 record remains the picking reference.
For trade item 6204-013, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6204-013 on the packing instruction.
Frequently Asked Questions
How should item 6204-013 and blower number 6441.96 be verified?
Match 6204-013 to the complete 6441.96 marking, then compare the 6204-013 plug, terminal count, mounting flange and wheel dimensions with the removed CITROEN unit.
Can 6204-013 have more than one vehicle-side blower configuration?
Yes. CITROEN production changes can affect 6204-013; confirm steering position, climate-control specification and the original 6204-013 geometry before approval.
What circuit checks are useful when 6204-013 does not operate?
For 6204-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6204-013 motor again.
Which details should accompany a wholesale request for 6204-013?
Provide item 6204-013, OE 6441.96, the stated application, quantity and destination; add 6204-013 carton or private-label requirements separately.
How can noise be avoided after fitting 6204-013?
Clear debris from the air inlet, check that the 6204-013 wheel turns freely, seat the 6204-013 flange evenly and keep wiring away from the impeller.
Request a quote for 6204-013: Send 6441.96, the 6204-013 application and required quantity for a fitment and supply review.
