64119204154 Blower Motor for BMW 3 Series
Primary OE reference: 64119204154
Cross-reference 1: 64118372797
Cross-reference 2: 641134537297
Cross-reference 3: 2311001
Cross-reference 4: 9159201
Cross-reference 5: 64116900685
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BMW 3 Series
Brand: BMW
Model: 3 Series
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
64119204154 Automotive Blower Motor Overview
Reference 64119204154 identifies the cabin-air blower assembly shown for the stated vehicle application.
For catalogue item 6230-038, the 64119204154 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6230-038 when comparing this 64119204154 airflow configuration.
OE Reference and Application
The primary catalogue number is 64119204154. The recorded application is BMW 3 Series. For 6230-038, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6230-038 with the approved OE reference.
HVAC Interface and 64119204154 installation
During work on 6230-038, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6230-038 before the lower trim is closed.
For item 6230-038, confirm that the 64119204154 centrifugal wheel clears its housing and that the 6230-038 connector lock engages without force. After seating 6230-038, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6230-038.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 64119204154 |
| Cross-reference numbers | 64118372797 / 641134537297 / 2311001 / 9159201 / 64116900685 |
| Vehicle brand | BMW |
| Vehicle model | 3 Series |
| Model year | Confirm by OE reference |
| 64119204154 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6230-038, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6230-038 record remains the picking reference.
For trade item 6230-038, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6230-038 on the packing instruction.
Frequently Asked Questions
How should item 6230-038 and blower number 64119204154 be verified?
Match 6230-038 to the complete 64119204154 marking, then compare the 6230-038 plug, terminal count, mounting flange and wheel dimensions with the removed BMW unit.
Can 6230-038 have more than one vehicle-side blower configuration?
Yes. BMW production changes can affect 6230-038; confirm steering position, climate-control specification and the original 6230-038 geometry before approval.
What circuit checks are useful when 6230-038 does not operate?
For 6230-038, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6230-038 motor again.
Which details should accompany a wholesale request for 6230-038?
Provide item 6230-038, OE 64119204154, the stated application, quantity and destination; add 6230-038 carton or private-label requirements separately.
How can noise be avoided after fitting 6230-038?
Clear debris from the air inlet, check that the 6230-038 wheel turns freely, seat the 6230-038 flange evenly and keep wiring away from the impeller.
Request a quote for 6230-038: Send 64119204154, the 6230-038 application and required quantity for a fitment and supply review.
