64116933664 Blower Motor for BMW 1 Series
Primary OE reference: 64116933664
Cross-reference 1: 64119227671
Cross-reference 2: 64119144201
Cross-reference 3: 2311004
Cross-reference 4: KM3610
Cross-reference 5: 985467W
Cross-reference 6: 34193
Cross-reference 7: 87118
Cross-reference 8: 985467WV
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BMW 1 Series
Brand: BMW
Model: 1 Series
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
64116933664 Automotive Blower Motor Overview
This product entry documents the 64116933664 blower unit with practical identification and 64116933664 installation checkpoints.
For catalogue item 6230-018, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 64116933664 blower important at idle and in traffic. Use 6230-018 when comparing this 64116933664 airflow configuration.
OE Reference and Application
The primary catalogue number is 64116933664. The recorded application is BMW 1 Series. For 6230-018, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6230-018 with the approved OE reference.
HVAC Interface and 64116933664 installation
During work on 6230-018, After 64116933664 installation, operate low through high speed and confirm 64116933664 airflow reaches the selected vents without abnormal vibration. Recheck 6230-018 before the lower trim is closed.
For item 6230-018, confirm that the 64116933664 centrifugal wheel clears its housing and that the 6230-018 connector lock engages without force. After seating 6230-018, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6230-018.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 64116933664 |
| Cross-reference numbers | 64119227671 / 64119144201 / 2311004 / KM3610 / 985467W / 34193 / 87118 / 985467WV |
| Vehicle brand | BMW |
| Vehicle model | 1 Series |
| Model year | Confirm by OE reference |
| 64116933664 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6230-018, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6230-018 record remains the picking reference.
For trade item 6230-018, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6230-018 on the packing instruction.
Frequently Asked Questions
How should item 6230-018 and blower number 64116933664 be verified?
Match 6230-018 to the complete 64116933664 marking, then compare the 6230-018 plug, terminal count, mounting flange and wheel dimensions with the removed BMW unit.
Can 6230-018 have more than one vehicle-side blower configuration?
Yes. BMW production changes can affect 6230-018; confirm steering position, climate-control specification and the original 6230-018 geometry before approval.
What circuit checks are useful when 6230-018 does not operate?
For 6230-018, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6230-018 motor again.
Which details should accompany a wholesale request for 6230-018?
Provide item 6230-018, OE 64116933664, the stated application, quantity and destination; add 6230-018 carton or private-label requirements separately.
How can noise be avoided after fitting 6230-018?
Clear debris from the air inlet, check that the 6230-018 wheel turns freely, seat the 6230-018 flange evenly and keep wiring away from the impeller.
Request a quote for 6230-018: Send 64116933664, the 6230-018 application and required quantity for a fitment and supply review.
