63840-3RAOA Front Right Fender Liner for NISSAN Sylphy 2012
Primary OE reference: 63840-3RAOA
Cross-reference 1: 63840-3RAOA
Product type: Fender Liner
Applicable vehicle: 2012 NISSAN Sylphy
Installation position: Front Right wheel house
Brand: NISSAN
Model: Sylphy
Vehicle year: 2012
Protection function: A vehicle-shaped front right wheel-house liner for splash control, with a wheel-house liner application.
Fitment confirmation: Use NS02016-018 for the listed 2012 NISSAN Sylphy enquiry, then verify the model generation and wheel-house position. Record the model, production year and wheel position on the enquiry; before reusable hardware is cleaned and sorted.
Mounting comparison: This part covers the front right inner wheel opening and interfaces with nearby trim or underbody panels. Check the panel perimeter against the removed liner before approval; so the replacement does not interfere with the tyre or suspension travel.
Supply scope: Supply is based on the shown wheel-house liner, while reusable fasteners normally remain vehicle-specific.
Receiving focus: Separate each OE line in mixed-model shipments; before clips are inserted into the wrong holes.
Purchase preparation: Attach the removed part’s molded reference when available; so packaging can be planned for the actual order size.
63840-3RAOA Front Right Fender Liner Overview
The listed fender liner corresponds to the front right position of 2012 NISSAN Sylphy, where road spray and debris must be separated from adjacent body cavities.
Wheel-Arch Protection and Panel Design
Verify the axle position together with the handed installation side for 63840-3RAOA on 2012 NISSAN Sylphy, to distinguish a full liner from a smaller rear or lower section.
Vehicle and OE Fitment Confirmation
Compare every supplied photo with the retained component for this front right liner, before a sample is approved for a larger order.
Product Technical Specifications
| Product type | Fender Liner |
|---|---|
| Primary OE reference | 63840-3RAOA |
| Internal item code | NS02016-018 |
| Vehicle brand | NISSAN |
| Model | Sylphy |
| Position | Front Right wheel house |
| Applicable vehicle | 2012 NISSAN Sylphy |
| Cross-reference numbers | 63840-3RAOA |
Installation and Receiving Guidance
Review the supplied component scope before transferring reusable clips when 63840-3RAOA arrives, to preserve evidence for a transport claim.
Wholesale Ordering Information
Keep the primary OE number visible on purchase and receiving documents for 63840-3RAOA and the front right 2012 NISSAN Sylphy application, to maintain consistent identification through receiving.
Frequently Asked Questions
How can I confirm 63840-3RAOA fits my vehicle?
Record the model, production year and wheel position on the enquiry for 2012 NISSAN Sylphy. before clips, sealers or underbody fasteners are disturbed.
Which wheel-house position uses 63840-3RAOA?
63840-3RAOA is recorded for the front right position. Confirm the side and axle against the removed liner before ordering.
What should be checked when 63840-3RAOA is received?
Check the liner under neutral lighting for cracks or pressure marks. to keep incoming inspection separate from installation damage.
What is included with the 63840-3RAOA supply?
The product scope follows the supplied images and OE reference, not the complete wheel-arch assembly.
Which details are needed for a 63840-3RAOA quotation?
Confirm the photograph set used to approve the order for NS02016-018. so the approved appearance remains clear to both parties.
