5M59-17A894-A-PA1O Rear Bumper Lip for FORD Focus 2005
Product: Rear Bumper Lip
Primary OE: 5M59-17A894-A-PA1O
Item code: FD02002-024
Cross-reference numbers:
5M59-17A894-A-PA1O
Brand: FORD
Model: Focus
Application reference: 2005 FORD Focus
Position: Rear
Verification: Verify the full application record and complete a non-destructive trial fit before sanding, drilling or painting.
Supply note: For wholesale review, provide quantity, consignee country, packaging instructions and the required inspection record.
5M59-17A894-A-PA1O is documented for projects that require the panel identity to remain tied to the vehicle record. For 2005 FORD Focus, Yongshang Auto tracks the requested rear bumper lip as FD02002-024.
FD02002-024 requires an application-specific review: The application record narrows the search, while final acceptance still depends on the exact vehicle configuration and original panel. This review is especially useful near model-year or equipment transitions.
Repair-Shop Approval Sequence
Fitment guidance for 5M59-17A894-A-PA1O. Before surface preparation, position the unpainted cover on the vehicle and examine the gaps at lamps, grille, fenders and tailgate or bonnet boundaries. Do not force a misaligned panel into place. The completed check supports a traceable discussion between buyer and supplier.
The rear location on 2005 FORD Focus should be reviewed as follows: State the body style, drive-market specification and production month on the enquiry. These details help distinguish closely related panels that share a familiar vehicle name. The buyer can then connect the physical review to the supplier item record.
Product Technical Specifications
| Product type | Rear Bumper Lip |
|---|---|
| Primary OE reference | 5M59-17A894-A-PA1O |
| Cross-reference numbers | 5M59-17A894-A-PA1O |
| Internal item code | FD02002-024 |
| Vehicle brand | FORD |
| Vehicle model | Focus |
| Model year | 2005 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2005 FORD Focus |
Service Role of the outer lower-bumper component
Functional context for 5M59-17A894-A-PA1O. This service part is commonly used in collision repair, refurbishment and wholesale replacement programmes. Its suitability still depends on the specific vehicle and equipment configuration. The repairer should document the outcome before transferring trim components.
Application note for item FD02002-024. Replacement is intended to return the outer bumper area to its designed form. Structural crash components must be inspected independently and replaced when required. A dated photo record makes the decision easier to review if questions arise later.
Panel Inspection Prior to Paint
Receiving note for carton FD02002-024. Store the lower-bumper component away from concentrated heat and do not place heavy cartons on top. A wide panel can develop shape problems when it is supported at only one point. The same information helps receiving staff identify the correct carton and panel.
Pre-finish check for 2005 FORD Focus. Inspect the back surface as carefully as the visible face. Mounting tabs, clip seats and bracket interfaces determine whether the lower-bumper component can be installed without stress. This evidence belongs in the same approval file as the vehicle photographs.
Quotation and Order-Control Details
A quotation for 5M59-17A894-A-PA1O should reflect this guidance: Confirm whether samples require workshop trial fitting before bulk release. A documented approval stage is valuable when supplying several regional vehicle variants. The repairer should document the outcome before transferring trim components.
The 1 square image attached to FD02002-024 support visual review. Provide the expected packaging method, label language and pallet requirements. Buyers should also identify any inspection standard that must appear on the order file. This evidence belongs in the same approval file as the vehicle photographs.
Frequently Asked Questions
What information helps validate OE 5M59-17A894-A-PA1O?
2005 FORD Focus is the stated reference for this page. Compare the new panel in an unpainted trial fit using serviceable vehicle-side brackets. Stop if gaps or mounting points require force. Those observations should remain available during sample and bulk-order review.
Where should buyers record item number FD02002-024?
Supplier-code context for this rear bumper lip. Confirm whether samples require workshop trial fitting before bulk release. A documented approval stage is valuable when supplying several regional vehicle variants. Keep FD02002-024 beside 5M59-17A894-A-PA1O in the final commercial record.
Which physical areas require comparison on this rear cover?
Panel-comparison guidance for 2005 FORD Focus. Use build-month data near facelift changes. Registration year by itself may not identify the correct generation boundary. This evidence belongs in the same approval file as the vehicle photographs.
At what stage should refinishing begin for 2005 FORD Focus?
Finishing guidance for OE 5M59-17A894-A-PA1O. Complete the VIN check and dry fit first. Permanent work can make an incorrect reference difficult to return or investigate. This evidence belongs in the same approval file as the vehicle photographs.
Which facts allow packaging and freight planning to begin?
Wholesale request for FD02002-024. Attach clear vehicle and old-cover images, then list quantity and delivery conditions. This supports both technical review and a traceable commercial response. This sequence keeps catalogue selection separate from cosmetic preparation.
Request a Quote for 5M59-17A894-A-PA1O
For a mixed order, provide a line-by-line quantity schedule and a corresponding label format. This helps warehouse teams maintain part identity during consolidation. For Yongshang Auto’s review, connect 5M59-17A894-A-PA1O and FD02002-024 with the intended 2005 FORD Focus, requested quantity and delivery market.
