53875-60160 Front Right Fender Liner for TOYOTA Prado FJ120 2010
Primary OE reference: 53875-60160
Cross-reference 1: 53875-60160
Product type: Fender Liner
Applicable vehicle: 2010 TOYOTA Prado FJ120
Installation position: Front Right wheel house
Brand: TOYOTA
Model: Prado FJ120
Vehicle year: 2010
Protection function: This wheel-well shield belongs at the front right corner and follows a wheel-house liner application.
Fitment confirmation: For workshop sourcing, TY02016-018 records the 2010 TOYOTA Prado FJ120 fitment; retain the original liner for comparison. Compare every supplied photo with the retained component; so the physical interfaces support the stated application.
Mounting comparison: The component mounts around the front right wheel opening and joins neighbouring splash protection pieces. Confirm the liner follows the wheel opening without twisting; so the OE reference and the actual wheel-house part agree.
Supply scope: Supply is based on the shown wheel-house liner, while reusable fasteners normally remain vehicle-specific.
Receiving focus: Retain the carton until the component passes incoming inspection; before clips are inserted into the wrong holes.
Purchase preparation: List each left-right or front-rear requirement on a separate order line; to resolve revisions that a model name alone cannot show.
53875-60160 Front Right Fender Liner Overview
This OE-based supply reference covers the front right position of 2010 TOYOTA Prado FJ120, after a torn, missing or deformed original liner requires replacement.
Wheel-Arch Protection and Panel Design
Compare the wheel-side surface and hidden body-side supports for 53875-60160 on 2010 TOYOTA Prado FJ120, because model revisions can move holes even when the overall curve looks similar.
Vehicle and OE Fitment Confirmation
Check the model generation and wheel-house position together for this front right liner, to reduce installation delays and avoidable returns.
Product Technical Specifications
| Product type | Fender Liner |
|---|---|
| Primary OE reference | 53875-60160 |
| Internal item code | TY02016-018 |
| Vehicle brand | TOYOTA |
| Model | Prado FJ120 |
| Position | Front Right wheel house |
| Applicable vehicle | 2010 TOYOTA Prado FJ120 |
| Cross-reference numbers | 53875-60160 |
Installation and Receiving Guidance
Separate each OE line in mixed-model shipments when 53875-60160 arrives, before the old hardware is committed to the replacement.
Wholesale Ordering Information
Provide VIN details if the application sits near a model-year change for 53875-60160 and the front right 2010 TOYOTA Prado FJ120 application, to keep the quotation traceable to the correct product page.
Frequently Asked Questions
How can I confirm 53875-60160 fits my vehicle?
Match the bumper, undertray and mud-flap interfaces before ordering for 2010 TOYOTA Prado FJ120. before clips, sealers or underbody fasteners are disturbed.
Which wheel-house position uses 53875-60160?
53875-60160 is recorded for the front right position. Confirm the side and axle against the removed liner before ordering.
What should be checked when 53875-60160 is received?
Check the liner under neutral lighting for cracks or pressure marks. before the old hardware is committed to the replacement.
What is included with the 53875-60160 supply?
Order planning should treat the liner and any installation clips as separate requirements unless confirmed otherwise.
Which details are needed for a 53875-60160 quotation?
Provide clear photos of the original liner and wheel-house opening for TY02016-018. to prioritise workshop needs without confusing replenishment orders.
