52498870 Blower Motor for BUICK Skyhawk
Primary OE reference: 52498870
Cross-reference 1: TYC700201
Cross-reference 2: PM3914
Cross-reference 3: PM140
Cross-reference 4: 35177
Cross-reference 5: 35588
Cross-reference 6: 35333
Cross-reference 7: 35005
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK Skyhawk
Brand: BUICK
Model: Skyhawk
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52498870 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 52498870 for application-led sourcing.
For catalogue item 6208-046, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-046 when comparing this 52498870 airflow configuration.
OE Reference and Application
The primary catalogue number is 52498870. The recorded application is BUICK Skyhawk. For 6208-046, Measure the 52498870 wheel height and outer diameter, then compare the electrical socket and base contour with the 52498870 product photos. Record 6208-046 with the approved OE reference.
HVAC Interface and 52498870 installation
During work on 6208-046, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 52498870 installation. Recheck 6208-046 before the lower trim is closed.
For item 6208-046, confirm that the 52498870 centrifugal wheel clears its housing and that the 6208-046 connector lock engages without force. After seating 6208-046, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-046.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52498870 |
| Cross-reference numbers | TYC700201 / PM3914 / PM140 / 35177 / 35588 / 35333 / 35005 |
| Vehicle brand | BUICK |
| Vehicle model | Skyhawk |
| Model year | Confirm by OE reference |
| 52498870 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-046, Packing preparation accounts for the 52498870 motor weight and wheel shape to reduce movement inside the carton. The 6208-046 record remains the picking reference.
For trade item 6208-046, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6208-046 on the packing instruction.
Frequently Asked Questions
How should item 6208-046 and blower number 52498870 be verified?
Match 6208-046 to the complete 52498870 marking, then compare the 6208-046 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-046 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-046; confirm steering position, climate-control specification and the original 6208-046 geometry before approval.
What circuit checks are useful when 6208-046 does not operate?
For 6208-046, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-046 motor again.
Which details should accompany a wholesale request for 6208-046?
Provide item 6208-046, OE 52498870, the stated application, quantity and destination; add 6208-046 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-046?
Clear debris from the air inlet, check that the 6208-046 wheel turns freely, seat the 6208-046 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-046: Send 52498870, the 6208-046 application and required quantity for a fitment and supply review.
