52495490 Blower Motor for BUICK LeSabre
Primary OE reference: 52495490
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK LeSabre
Brand: BUICK
Model: LeSabre
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52495490 Automotive Blower Motor Overview
The 52495490 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6208-076, When the climate-control circuit commands 52495490 airflow, the electric motor rotates the 52495490 fan wheel inside the HVAC housing. Use 6208-076 when comparing this 52495490 airflow configuration.
OE Reference and Application
The primary catalogue number is 52495490. The recorded application is BUICK LeSabre. For 6208-076, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6208-076 with the approved OE reference.
HVAC Interface and 52495490 installation
During work on 6208-076, If 52495490 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 52495490 motor is the only cause. Recheck 6208-076 before the lower trim is closed.
For item 6208-076, confirm that the 52495490 centrifugal wheel clears its housing and that the 6208-076 connector lock engages without force. After seating 6208-076, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-076.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52495490 |
| Cross-reference numbers | 52495490 |
| Vehicle brand | BUICK |
| Vehicle model | LeSabre |
| Model year | Confirm by OE reference |
| 52495490 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-076, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-076 record remains the picking reference.
For trade item 6208-076, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6208-076 on the packing instruction.
Frequently Asked Questions
How should item 6208-076 and blower number 52495490 be verified?
Match 6208-076 to the complete 52495490 marking, then compare the 6208-076 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-076 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-076; confirm steering position, climate-control specification and the original 6208-076 geometry before approval.
What circuit checks are useful when 6208-076 does not operate?
For 6208-076, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-076 motor again.
Which details should accompany a wholesale request for 6208-076?
Provide item 6208-076, OE 52495490, the stated application, quantity and destination; add 6208-076 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-076?
Clear debris from the air inlet, check that the 6208-076 wheel turns freely, seat the 6208-076 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-076: Send 52495490, the 6208-076 application and required quantity for a fitment and supply review.
