52479327 Blower Motor for RENAULT Clio IV
Primary OE reference: 52479327
Cross-reference 1: 0130063102
Cross-reference 2: 7701038210
Cross-reference 3: 7701046084
Cross-reference 4: 0917343
Cross-reference 5: 51163965
Cross-reference 6: 0130111169
Product type: Automotive HVAC Blower Motor
Applicable vehicle: RENAULT Clio IV
Brand: RENAULT
Model: Clio IV
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
52479327 Automotive Blower Motor Overview
The photographed motor-and-wheel unit is indexed by 52479327 to support OE-number comparison before purchase.
For catalogue item 6229-014, Cabin 52479327 airflow depends on the 52479327 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6229-014 when comparing this 52479327 airflow configuration.
OE Reference and Application
The primary catalogue number is 52479327. The recorded application is RENAULT Clio IV. For 6229-014, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6229-014 with the approved OE reference.
HVAC Interface and 52479327 installation
During work on 6229-014, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6229-014 before the lower trim is closed.
For item 6229-014, confirm that the 52479327 centrifugal wheel clears its housing and that the 6229-014 connector lock engages without force. After seating 6229-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6229-014.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 52479327 |
| Cross-reference numbers | 0130063102 / 7701038210 / 7701046084 / 0917343 / 51163965 / 0130111169 |
| Vehicle brand | RENAULT |
| Vehicle model | Clio IV |
| Model year | Confirm by OE reference |
| 52479327 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6229-014, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6229-014 record remains the picking reference.
For trade item 6229-014, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6229-014 on the packing instruction.
Frequently Asked Questions
How should item 6229-014 and blower number 52479327 be verified?
Match 6229-014 to the complete 52479327 marking, then compare the 6229-014 plug, terminal count, mounting flange and wheel dimensions with the removed RENAULT unit.
Can 6229-014 have more than one vehicle-side blower configuration?
Yes. RENAULT production changes can affect 6229-014; confirm steering position, climate-control specification and the original 6229-014 geometry before approval.
What circuit checks are useful when 6229-014 does not operate?
For 6229-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6229-014 motor again.
Which details should accompany a wholesale request for 6229-014?
Provide item 6229-014, OE 52479327, the stated application, quantity and destination; add 6229-014 carton or private-label requirements separately.
How can noise be avoided after fitting 6229-014?
Clear debris from the air inlet, check that the 6229-014 wheel turns freely, seat the 6229-014 flange evenly and keep wiring away from the impeller.
Request a quote for 6229-014: Send 52479327, the 6229-014 application and required quantity for a fitment and supply review.
