52169-06240 Rear Bumper Lip for TOYOTA Camry 2018
Product: Rear Bumper Lip
Primary OE: 52169-06240
Item code: TY02002-010
Cross-reference numbers:
52169-06240
Brand: TOYOTA
Model: Camry
Application reference: 2018 TOYOTA Camry (US-market version)
Position: Rear
Verification: Do not select from appearance alone; compare the OE code, removed panel and actual bumper assembly.
Supply note: Identify sample or bulk demand and include the destination so shipment volume and protection can be evaluated.
52169-06240 is presented for collision-repair sourcing where the OE reference is the first approval point. For 2018 TOYOTA Camry (US-market version), Yongshang Auto tracks the requested rear bumper lip as TY02002-010.
TY02002-010 requires an application-specific review: Fitment confirmation is strongest when the OE reference, build information and physical panel geometry all support the same conclusion. This approach reduces dependence on exterior appearance alone.
How to Validate the Requested Cover
Fitment guidance for 52169-06240. Begin with the complete OE string, then compare the model year and installation position against the vehicle record. Add VIN and production-date evidence whenever the catalogue shows a change within the same generation. That comparison gives the workshop a clearer basis for a pre-paint decision.
The rear location on 2018 TOYOTA Camry (US-market version) should be reviewed as follows: Retain the original-part label and wide-angle vehicle photographs in the approval file. This creates a traceable reference if questions arise during sample inspection. That comparison gives the workshop a clearer basis for a pre-paint decision.
Product Technical Specifications
| Product type | Rear Bumper Lip |
|---|---|
| Primary OE reference | 52169-06240 |
| Cross-reference numbers | 52169-06240 |
| Internal item code | TY02002-010 |
| Vehicle brand | TOYOTA |
| Vehicle model | Camry |
| Model year | 2018 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2018 TOYOTA Camry (US-market version) |
Outer-Surface Repair Considerations
Functional context for 52169-06240. Successful replacement restores the relationship between the bumper corners, lighting zones and neighbouring sheet-metal edges. That relationship should be reviewed before paint application. That comparison gives the workshop a clearer basis for a pre-paint decision.
Application note for item TY02002-010. The bumper lip forms the outer visible layer of the bumper system and helps restore the intended vehicle profile after repair. Its edges must align with nearby lamps, grilles and body panels. This approach reduces dependence on exterior appearance alone.
Surface and Edge Examination
Receiving note for carton TY02002-010. Verify that the lower-bumper component has the expected upper, lower and side attachment features. Stop the process if a major interface differs from the original vehicle part. This evidence belongs in the same approval file as the vehicle photographs.
Pre-finish check for 2018 TOYOTA Camry (US-market version). Verify that the lower-bumper component has the expected upper, lower and side attachment features. Stop the process if a major interface differs from the original vehicle part. This sequence keeps catalogue selection separate from cosmetic preparation.
Order Details for Wholesale Buyers
A quotation for 52169-06240 should reflect this guidance: Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. A dated photo record makes the decision easier to review if questions arise later.
The 3 square images attached to TY02002-010 support visual review. For a mixed order, provide a line-by-line quantity schedule and a corresponding label format. This helps warehouse teams maintain part identity during consolidation. The completed check supports a traceable discussion between buyer and supplier.
Frequently Asked Questions
Which evidence is most useful when checking OE 52169-06240?
2018 TOYOTA Camry (US-market version) is the stated reference for this page. Record the VIN and any sensor, washer, camera, lamp or moulding equipment. Those features can determine the required aperture layout. That comparison gives the workshop a clearer basis for a pre-paint decision.
How is supplier code TY02002-010 used during purchasing?
Supplier-code context for this rear bumper lip. Send a clear old-part photograph together with the vehicle application. This gives the commercial team a practical comparison record before confirming price and lead time. Keep TY02002-010 beside 52169-06240 in the final commercial record.
Which observations belong in the fitment comparison record?
Panel-comparison guidance for 2018 TOYOTA Camry (US-market version). Inspect the vehicle-side retainers and supports before blaming a panel gap on the replacement part. Damaged hardware can change alignment. A dated photo record makes the decision easier to review if questions arise later.
What is the recommended sequence before coating the panel?
Finishing guidance for OE 52169-06240. Resolve damaged brackets or uncertain equipment openings first; coating the part should be the last step in the approval sequence. This review is especially useful near model-year or equipment transitions.
What evidence and commercial data support sample approval?
Wholesale request for TY02002-010. Confirm whether loose accessories are expected and specify carton marks, corner protection and pre-shipment photograph requirements. This approach reduces dependence on exterior appearance alone.
Request a Quote for 52169-06240
Confirm whether samples require workshop trial fitting before bulk release. A documented approval stage is valuable when supplying several regional vehicle variants. For Yongshang Auto’s review, connect 52169-06240 and TY02002-010 with the intended 2018 TOYOTA Camry (US-market version), requested quantity and delivery market.
