51918027 Blower Motor for FIAT
Primary OE reference: 51918027
Cross-reference 1: 5T5930100
Cross-reference 2: 4038677
Cross-reference 3: 5T590127
Cross-reference 4: 1419846AA
Cross-reference 5: 68266039AA
Cross-reference 6: 68350343AA
Cross-reference 7: 68240535AA
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FIAT
Brand: FIAT
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
51918027 Automotive Blower Motor Overview
This product entry documents the 51918027 blower unit with practical identification and 51918027 installation checkpoints.
For catalogue item 6219-052, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 51918027 blower important at idle and in traffic. Use 6219-052 when comparing this 51918027 airflow configuration.
OE Reference and Application
The primary catalogue number is 51918027. The recorded application is FIAT. For 6219-052, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6219-052 with the approved OE reference.
HVAC Interface and 51918027 installation
During work on 6219-052, After 51918027 installation, operate low through high speed and confirm 51918027 airflow reaches the selected vents without abnormal vibration. Recheck 6219-052 before the lower trim is closed.
For item 6219-052, confirm that the 51918027 centrifugal wheel clears its housing and that the 6219-052 connector lock engages without force. After seating 6219-052, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-052.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 51918027 |
| Cross-reference numbers | 5T5930100 / 4038677 / 5T590127 / 1419846AA / 68266039AA / 68350343AA / 68240535AA |
| Vehicle brand | FIAT |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 51918027 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6219-052, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6219-052 record remains the picking reference.
For trade item 6219-052, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6219-052 on the packing instruction.
Frequently Asked Questions
How should item 6219-052 and blower number 51918027 be verified?
Match 6219-052 to the complete 51918027 marking, then compare the 6219-052 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.
Can 6219-052 have more than one vehicle-side blower configuration?
Yes. FIAT production changes can affect 6219-052; confirm steering position, climate-control specification and the original 6219-052 geometry before approval.
What circuit checks are useful when 6219-052 does not operate?
For 6219-052, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-052 motor again.
Which details should accompany a wholesale request for 6219-052?
Provide item 6219-052, OE 51918027, the stated application, quantity and destination; add 6219-052 carton or private-label requirements separately.
How can noise be avoided after fitting 6219-052?
Clear debris from the air inlet, check that the 6219-052 wheel turns freely, seat the 6219-052 flange evenly and keep wiring away from the impeller.
Request a quote for 6219-052: Send 51918027, the 6219-052 application and required quantity for a fitment and supply review.
