5139720AA Blower Motor for JEEP Liberty
Primary OE reference: 5139720AA
Cross-reference 1: 5139721AA
Cross-reference 2: 68028890AA
Cross-reference 3: 615-00680
Cross-reference 4: 5066553AA
Cross-reference 5: TYC700154
Product type: Automotive HVAC Blower Motor
Applicable vehicle: JEEP Liberty
Brand: JEEP
Model: Liberty
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.
Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
5139720AA Automotive Blower Motor Overview
Buyers comparing an interior fan motor can use 5139720AA together with the 5139720AA product images and vehicle data on this page.
For catalogue item 6217-051, the 5139720AA blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6217-051 when comparing this 5139720AA airflow configuration.
OE Reference and Application
The primary catalogue number is 5139720AA. The recorded application is JEEP Liberty. For 6217-051, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6217-051 with the approved OE reference.
HVAC Interface and 5139720AA installation
During work on 6217-051, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6217-051 before the lower trim is closed.
For item 6217-051, confirm that the 5139720AA centrifugal wheel clears its housing and that the 6217-051 connector lock engages without force. After seating 6217-051, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6217-051.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 5139720AA |
| Cross-reference numbers | 5139721AA / 68028890AA / 615-00680 / 5066553AA / TYC700154 |
| Vehicle brand | JEEP |
| Vehicle model | Liberty |
| Model year | Confirm by OE reference |
| 5139720AA installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6217-051, Packing preparation accounts for the 5139720AA motor weight and wheel shape to reduce movement inside the carton. The 6217-051 record remains the picking reference.
For trade item 6217-051, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6217-051 on the packing instruction.
Frequently Asked Questions
How should item 6217-051 and blower number 5139720AA be verified?
Match 6217-051 to the complete 5139720AA marking, then compare the 6217-051 plug, terminal count, mounting flange and wheel dimensions with the removed JEEP unit.
Can 6217-051 have more than one vehicle-side blower configuration?
Yes. JEEP production changes can affect 6217-051; confirm steering position, climate-control specification and the original 6217-051 geometry before approval.
What circuit checks are useful when 6217-051 does not operate?
For 6217-051, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6217-051 motor again.
Which details should accompany a wholesale request for 6217-051?
Provide item 6217-051, OE 5139720AA, the stated application, quantity and destination; add 6217-051 carton or private-label requirements separately.
How can noise be avoided after fitting 6217-051?
Clear debris from the air inlet, check that the 6217-051 wheel turns freely, seat the 6217-051 flange evenly and keep wiring away from the impeller.
Request a quote for 6217-051: Send 5139720AA, the 6217-051 application and required quantity for a fitment and supply review.
