5049767 Blower Motor for BUICK LeSabre
Primary OE reference: 5049767
Cross-reference 1: 52456175
Cross-reference 2: 52466053
Product type: Automotive HVAC Blower Motor
Applicable vehicle: BUICK LeSabre
Brand: BUICK
Model: LeSabre
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
5049767 Automotive Blower Motor Overview
This product entry documents the 5049767 blower unit with practical identification and 5049767 installation checkpoints.
For catalogue item 6208-077, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 5049767 blower important at idle and in traffic. Use 6208-077 when comparing this 5049767 airflow configuration.
OE Reference and Application
The primary catalogue number is 5049767. The recorded application is BUICK LeSabre. For 6208-077, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6208-077 with the approved OE reference.
HVAC Interface and 5049767 installation
During work on 6208-077, After 5049767 installation, operate low through high speed and confirm 5049767 airflow reaches the selected vents without abnormal vibration. Recheck 6208-077 before the lower trim is closed.
For item 6208-077, confirm that the 5049767 centrifugal wheel clears its housing and that the 6208-077 connector lock engages without force. After seating 6208-077, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-077.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 5049767 |
| Cross-reference numbers | 52456175 / 52466053 |
| Vehicle brand | BUICK |
| Vehicle model | LeSabre |
| Model year | Confirm by OE reference |
| 5049767 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6208-077, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-077 record remains the picking reference.
For trade item 6208-077, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-077 on the packing instruction.
Frequently Asked Questions
How should item 6208-077 and blower number 5049767 be verified?
Match 6208-077 to the complete 5049767 marking, then compare the 6208-077 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.
Can 6208-077 have more than one vehicle-side blower configuration?
Yes. BUICK production changes can affect 6208-077; confirm steering position, climate-control specification and the original 6208-077 geometry before approval.
What circuit checks are useful when 6208-077 does not operate?
For 6208-077, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-077 motor again.
Which details should accompany a wholesale request for 6208-077?
Provide item 6208-077, OE 5049767, the stated application, quantity and destination; add 6208-077 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-077?
Clear debris from the air inlet, check that the 6208-077 wheel turns freely, seat the 6208-077 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-077: Send 5049767, the 6208-077 application and required quantity for a fitment and supply review.
