5027252800 Blower Motor for NISSAN
Primary OE reference: 5027252800
Cross-reference 1: 5027253160
Cross-reference 2: 5027252760
Cross-reference 3: 72223SA001
Cross-reference 4: DRF8434001G
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.
Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
5027252800 Automotive Blower Motor Overview
This page records the pictured HVAC blower motor under OE reference 5027252800 for application-led sourcing.
For catalogue item 6205-095, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6205-095 when comparing this 5027252800 airflow configuration.
OE Reference and Application
The primary catalogue number is 5027252800. The recorded application is NISSAN. For 6205-095, Measure the 5027252800 wheel height and outer diameter, then compare the electrical socket and base contour with the 5027252800 product photos. Record 6205-095 with the approved OE reference.
HVAC Interface and 5027252800 installation
During work on 6205-095, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 5027252800 installation. Recheck 6205-095 before the lower trim is closed.
For item 6205-095, confirm that the 5027252800 centrifugal wheel clears its housing and that the 6205-095 connector lock engages without force. After seating 6205-095, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-095.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 5027252800 |
| Cross-reference numbers | 5027253160 / 5027252760 / 72223SA001 / DRF8434001G |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 5027252800 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-095, Packing preparation accounts for the 5027252800 motor weight and wheel shape to reduce movement inside the carton. The 6205-095 record remains the picking reference.
For trade item 6205-095, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6205-095 on the packing instruction.
Frequently Asked Questions
How should item 6205-095 and blower number 5027252800 be verified?
Match 6205-095 to the complete 5027252800 marking, then compare the 6205-095 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-095 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-095; confirm steering position, climate-control specification and the original 6205-095 geometry before approval.
What circuit checks are useful when 6205-095 does not operate?
For 6205-095, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-095 motor again.
Which details should accompany a wholesale request for 6205-095?
Provide item 6205-095, OE 5027252800, the stated application, quantity and destination; add 6205-095 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-095?
Clear debris from the air inlet, check that the 6205-095 wheel turns freely, seat the 6205-095 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-095: Send 5027252800, the 6205-095 application and required quantity for a fitment and supply review.
