5027250993 Blower Motor for NISSAN
Primary OE reference: 5027250993
Cross-reference 1: DRF8434010G
Cross-reference 2: 5027252820
Cross-reference 3: 72223SA060
Product type: Automotive HVAC Blower Motor
Applicable vehicle: NISSAN
Brand: NISSAN
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
5027250993 Automotive Blower Motor Overview
This product entry documents the 5027250993 blower unit with practical identification and 5027250993 installation checkpoints.
For catalogue item 6205-097, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 5027250993 blower important at idle and in traffic. Use 6205-097 when comparing this 5027250993 airflow configuration.
OE Reference and Application
The primary catalogue number is 5027250993. The recorded application is NISSAN. For 6205-097, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6205-097 with the approved OE reference.
HVAC Interface and 5027250993 installation
During work on 6205-097, After 5027250993 installation, operate low through high speed and confirm 5027250993 airflow reaches the selected vents without abnormal vibration. Recheck 6205-097 before the lower trim is closed.
For item 6205-097, confirm that the 5027250993 centrifugal wheel clears its housing and that the 6205-097 connector lock engages without force. After seating 6205-097, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6205-097.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 5027250993 |
| Cross-reference numbers | DRF8434010G / 5027252820 / 72223SA060 |
| Vehicle brand | NISSAN |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 5027250993 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6205-097, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6205-097 record remains the picking reference.
For trade item 6205-097, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6205-097 on the packing instruction.
Frequently Asked Questions
How should item 6205-097 and blower number 5027250993 be verified?
Match 6205-097 to the complete 5027250993 marking, then compare the 6205-097 plug, terminal count, mounting flange and wheel dimensions with the removed NISSAN unit.
Can 6205-097 have more than one vehicle-side blower configuration?
Yes. NISSAN production changes can affect 6205-097; confirm steering position, climate-control specification and the original 6205-097 geometry before approval.
What circuit checks are useful when 6205-097 does not operate?
For 6205-097, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6205-097 motor again.
Which details should accompany a wholesale request for 6205-097?
Provide item 6205-097, OE 5027250993, the stated application, quantity and destination; add 6205-097 carton or private-label requirements separately.
How can noise be avoided after fitting 6205-097?
Clear debris from the air inlet, check that the 6205-097 wheel turns freely, seat the 6205-097 flange evenly and keep wiring away from the impeller.
Request a quote for 6205-097: Send 5027250993, the 6205-097 application and required quantity for a fitment and supply review.
