4M0955102A Front Right Headlight Washer Nozzle for AUDI Q7 2016
Primary OE reference: 4M0955102A
Cross-reference number 1: 4M0 955 102A
Cross-reference number 2: 4M0955102A
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI Q7 2016
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q7
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-103
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4M0955102A Front Right Headlight Washer Nozzle Product Overview
The component shown under 4M0955102A is a front right headlight washer nozzle intended for AUDI Q7 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q7
Compatibility for 4M0955102A should be confirmed against AUDI Q7 2016 and the right installation side. The review should verify nearby parking-sensor or trim interfaces, confirm the front bumper option before ordering, and verify the required left or right installation side. Use the removed part and product photographs to check the production date where model-year transitions overlap, check regional variations in headlamp-cleaning equipment, and review body-style differences within the same model generation; finally, confirm that the vehicle is equipped with a factory headlight washer system and match the mounting pattern around the bumper aperture.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-103 should be checked separately. For this headlight washer nozzle, compare the outer surface profile with the bumper opening, inspect the rear reinforcement ribs, and check the joint between the visible cap and hidden support. A direct comparison with the removed part should additionally review the clip geometry on the rear face, compare the distance between mounting points, and inspect the hose connector for ovality. Before the item is accepted, check the nozzle outlet orientation and review the left-to-right mirrored geometry.
OE Identification and Side Confirmation
4M0955102A is the primary OE identity for this right front right headlight washer nozzle, while AD02010-103 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-103 begins before the bumper area is disturbed: inspect the bumper opening after the trial fit and replace distorted clips or damaged seals. During trial fitting, inspect the bumper opening after the trial fit, replace distorted clips or damaged seals, and inspect the bumper opening after the trial fit. Before returning the vehicle to service, replace distorted clips or damaged seals, inspect the bumper opening after the trial fit, and replace distorted clips or damaged seals.
Receiving Inspection
When AD02010-103 arrives, receiving staff should confirm the bumper-facing edge has not been compressed in transit, separate mirrored components immediately after carton opening, and compare the visible surface texture with the ordered specification. Before workshop release, inspect projecting pins before placing the item on a hard bench, confirm the internal item code before mixed stock is shelved, verify the nozzle head returns smoothly without applying excess force, and protect the visible face again after inspection is complete. Complete the inspection by ensuring that staff check molded tabs for whitening, cracks or transport stress, compare left and right orientation before removing protective wrapping, and inspect the rear locator shape without forcing any movable section.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4M0955102A |
| Cross-reference numbers | 4M0 955 102A 4M0955102A |
| Internal item code | AD02010-103 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q7 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4M0955102A, please confirm whether the visible cover needs a primed or finished surface, state any outer-carton marking requirements, and check carton labels at receiving. Packing instructions should request protective inner wrapping for painted faces, verify the packed quantity by OE reference, and retain the product label until fitment is confirmed. Before dispatch, separate left and right items on the packing list and request replacement-part documentation when required.
Frequently Asked Questions
Are clips, hoses or fasteners supplied with 4M0955102A?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For item AD02010-103, the approval should protect hose spigots and projecting tabs. The same item record should also use dividers to prevent caps from rubbing each other.
Is workshop installation recommended for 4M0955102A?
Yes. A qualified workshop can access the bumper area on the Q7, transfer hoses or clips safely and test the washer system for correct operation and leaks. On the listed AUDI Q7 2016, technicians should verify that the cover closes without rubbing the bumper. A workshop comparison should additionally align the cover flush with the bumper surface.
Why must left and right versions of 4M0955102A be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For the right-side order line, check the joint between the visible cap and hidden support. The order review should further compare the support flange width.
Can product photographs alone confirm 4M0955102A compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 4M0955102A should confirm whether a cap, nozzle, bracket or complete assembly is required. Receiving staff should also use the full OE number, not a partial family reference.
How should 4M0955102A be packed for export?
The front right headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. Before this headlight washer nozzle is accepted, state the requested delivery schedule. Before approval, the buyer or technician should separate left and right items on the packing list.
