4M0807753B Front Left Headlight Washer Nozzle Cover for AUDI Q7 2016
Primary OE reference: 4M0807753B
Cross-reference number 1: 4M0 807 753 B
Cross-reference number 2: 4M0807753B
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q7 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q7
Model year: 2016
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-104
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4M0807753B Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4M0807753B is a front left headlight washer nozzle cover intended for AUDI Q7 2016. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q7
Compatibility for 4M0807753B should be confirmed against AUDI Q7 2016 and the left installation side. The review should confirm the front bumper option before ordering, review facelift and pre-facelift washer layouts, and verify that the OE reference is not for the opposite side. Use the removed part and product photographs to check whether the original cover is supplied separately from its support, match the exact model year and bumper revision, and retain the removed component for a direct physical comparison; finally, match the connector and fluid inlet position where applicable and separate mirrored left and right items during inventory selection.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-104 should be checked separately. For this headlight washer nozzle cover, inspect narrow plastic tips before installation, compare the cap perimeter and corner radii, and review the clip geometry on the rear face. A direct comparison with the removed part should additionally check the bumper-facing surface for transport marks, inspect the molded tabs for cracks or distortion, and compare the depth of the actuator body. Before the item is accepted, review the bracket stiffness and screw seats and check the nozzle outlet orientation.
OE Identification and Side Confirmation
4M0807753B is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-104 is the internal item code. Match both references to the vehicle record, then separate mirrored left and right items during inventory selection. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-104 begins before the bumper area is disturbed: disconnect the fluid hose without twisting the plastic spigot and check that the washer unit is fully seated in its guide. During trial fitting, route the washer hose away from sharp edges, verify that the cover closes without rubbing the bumper, and avoid forcing a mirrored part into the bumper opening. Before returning the vehicle to service, inspect the bumper opening after the trial fit, verify that the cap remains attached through a full washer cycle, and reconfirm the OE number before discarding the packaging.
Receiving Inspection
When AD02010-104 arrives, receiving staff should check the actuator body for straightness before trial installation, confirm the internal item code before mixed stock is shelved, and compare the supplied side with the vehicle repair order. Before workshop release, confirm the nozzle outlet is clean and unobstructed, inspect the rear locator shape without forcing any movable section, compare connector depth and hose angle with the retained original part, and separate mirrored components immediately after carton opening. Complete the inspection by ensuring that staff confirm that small seals or clips have not remained in the wrapping, check the carton partition for evidence of part-to-part contact, and protect the visible face again after inspection is complete.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4M0807753B |
| Cross-reference numbers | 4M0 807 753 B 4M0807753B |
| Internal item code | AD02010-104 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q7 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4M0807753B, please request export-carton dimensions before freight booking, state the target vehicle application, and confirm whether caps and nozzles should be supplied as pairs. Packing instructions should identify project stock and service stock separately, request barcode or private-label details when needed, and check carton labels at receiving. Before dispatch, retain the product label until fitment is confirmed and confirm the preferred incoterm.
Frequently Asked Questions
Which side uses 4M0807753B?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For item AD02010-104, the approval should compare the cap perimeter and corner radii. The same item record should also check the complete supplied scope against the photographs.
Should the washer system be tested after fitting 4M0807753B?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. On the listed AUDI Q7 2016, technicians should check the system for leaks after reconnection. A workshop comparison should additionally confirm that no hose is pinched behind the bumper.
Why must left and right versions of 4M0807753B be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For the left-side order line, check the fluid inlet for storage contamination. The order review should further compare the cap perimeter and corner radii.
Can product photographs alone confirm 4M0807753B compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. The product-specific check for 4M0807753B should compare the complete OE marking with the removed washer component. Receiving staff should also use the full OE number, not a partial family reference.
Is workshop installation recommended for 4M0807753B?
Yes. A qualified workshop can access the bumper area on the Q7, transfer hoses or clips safely and test the washer system for correct operation and leaks. Before this headlight washer nozzle cover is accepted, transfer reusable clips only after checking their condition. Before approval, the buyer or technician should inspect nearby wiring and sensors before refitting trim.
