4M0 807 158E Air Intake Duct for 2020 AUDI Q7 – Front Right
Primary OE reference: 4M0 807 158E
Cross-reference 1: 4M0 807 158E
Product type: Air Intake Duct
Applicable vehicle: 2020 AUDI Q7
Installation position: Front Right
Brand: AUDI
Model: Q7
Vehicle year: 2020
Product form: Molded engine air duct
Product identification: The gallery documents SKU AD02027-060, OE 4M0 807 158E and the Front Right geometry required for 2020 AUDI Q7.
Engineering purpose: Contributes to orderly intake or cooling airflow through its port size, wall shape and mounting position.
Fitment check: Identify the required installation corner and inspect the original fastener sequence for SKU AD02027-060.
Receiving and installation: Dry-fit each connector, verify even seating and stop if the part must be bent to meet its mounting points.
Wholesale enquiry: Distributors should state AD02027-060, delivery country, sample or batch quantity and vehicle configuration.
Catalog context: OE 4M0 807 158E is listed under internal code AD02027-060 for 2020 AUDI Q7. The supplied component belongs at the Front Right position, where its molded outline and connections distinguish it from nearby air-path parts.
Selection note: Confirm 4M0 807 158E through VIN or catalog data, then compare SKU AD02027-060 with the original part’s connection count, port angle, brackets and Front Right orientation. Model name alone is not enough for final approval.
4M0 807 158E Air Intake Duct Overview
The molded air intake duct shown is referenced as 4M0 807 158E for 2020 AUDI Q7. Its vehicle-side geometry, not only the general part name, determines whether SKU AD02027-060 is the correct choice.
Airflow Function and Molded Design
Airflow guidance depends on the original contour rather than a generic tube diameter alone. Ribs, flanges and transitions all contribute to how the part sits in the vehicle.
OE, Vehicle and Position Matching
Review the OE code without omitting letters or suffixes. For 2020 AUDI Q7, the Front Right position should correspond to the photographed bends and locator features.
Product Specifications
| Product type | Air Intake Duct |
|---|---|
| Primary OE reference | 4M0 807 158E |
| Internal item code | AD02027-060 |
| Vehicle brand | AUDI |
| Model | Q7 |
| Vehicle year | 2020 |
| Application | 2020 AUDI Q7 |
| Installation position | Front Right |
| Product form | Molded engine air duct |
| Cross-reference numbers | 4M0 807 158E |
Receiving and Installation Guidance
Compare the received part with approved photos before discarding packaging. Reuse original fasteners only when their threads, heads and retaining features remain serviceable.
Wholesale and Distributor Supply
B2B enquiries for AD02027-060 should state quantity, destination port, vehicle configuration and required lead time. Sample approval may be arranged before regular supply.
Frequently Asked Questions
How can buyers confirm 4M0 807 158E fits the vehicle?
Match the model year range, engine option and Front Right position first; then compare SKU AD02027-060 with the original duct’s full length and connection direction.
What is the purpose of 4M0 807 158E?
The vehicle uses this shaped duct to carry or direct air across a specific distance and angle. Proper mounting keeps the passage stable under vibration and temperature change.
Does 4M0 807 158E fit every AUDI Q7?
Compatibility is limited to the recorded vehicle configuration. Confirm 2020 AUDI Q7, OE 4M0 807 158E and the physical connection layout together.
What should be inspected before installing 4M0 807 158E?
Install the part with the vehicle system cool. Confirm each interface sits naturally, then tighten in stages to avoid distorting the molded passage.
What information is needed for a wholesale quote on 4M0 807 158E?
For export supply, send AD02027-060, destination, required units and carton-marking instructions. Vehicle and position details should be finalized before release.
