4L0955276G Front Right Headlight Washer Nozzle Cover for AUDI Q7 2010
Primary OE reference: 4L0955276G
Cross-reference number 1: 4L0 955 276G
Cross-reference number 2: 4L0955276G
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI Q7 2010
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: Q7
Model year: 2010
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-109
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4L0955276G Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 4L0955276G is a front right headlight washer nozzle cover intended for AUDI Q7 2010. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q7
Compatibility for 4L0955276G should be confirmed against AUDI Q7 2010 and the right installation side. The review should review body-style differences within the same model generation, compare the actuator orientation behind the bumper cover, and match the exact model year and bumper revision. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, check the production date where model-year transitions overlap, and separate mirrored left and right items during inventory selection; finally, compare the nozzle travel direction with the vehicle-side installation and confirm the destination-market equipment specification.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-109 should be checked separately. For this headlight washer nozzle cover, inspect the base bracket around every locating slot, compare the cap-to-support engagement method, and review the spring-loaded return features where fitted. A direct comparison with the removed part should additionally check the fluid inlet for storage contamination, inspect narrow plastic tips before installation, and compare the depth of the actuator body. Before the item is accepted, review the sealing area around the hose connection and check whether the visible part requires painting.
OE Identification and Side Confirmation
4L0955276G is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-109 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-109 begins before the bumper area is disturbed: confirm that no hose is pinched behind the bumper and protect the painted bumper surface during removal. During trial fitting, route the washer hose away from sharp edges, clean the hose and connector before assembly, and follow the vehicle workshop procedure for bumper removal. Before returning the vehicle to service, check that the washer unit is fully seated in its guide, test for drips after the washer pump stops, and retain the original fasteners unless replacements are specified.
Receiving Inspection
When AD02010-109 arrives, receiving staff should photograph the received item if the vehicle fitment is still pending, document any shortage before the receiving inspection is closed, and inspect the rear locator shape without forcing any movable section. Before workshop release, compare the visible surface texture with the ordered specification, match the item label to the purchase order and OE reference, compare connector depth and hose angle with the retained original part, and measure the main mounting span when two bumper versions appear similar. Complete the inspection by ensuring that staff compare left and right orientation before removing protective wrapping, separate mirrored components immediately after carton opening, and inspect the fluid passage only with clean, non-damaging tools.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4L0955276G |
| Cross-reference numbers | 4L0 955 276G 4L0955276G |
| Internal item code | AD02010-109 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2010 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI Q7 2010 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4L0955276G, please request protective inner wrapping for painted faces, identify project stock and service stock separately, and separate fragile actuator bodies from heavier metal parts. Packing instructions should protect each nozzle outlet from dust during transit, plug open fluid connections during packing, and check carton labels at receiving. Before dispatch, request a packing-list breakdown by internal item code and provide the complete destination address or port.
Frequently Asked Questions
What should be inspected when 4L0955276G arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item AD02010-109, the approval should confirm the bumper-facing edge has not been compressed in transit. The same item record should also compare the visible surface texture with the ordered specification.
Can product photographs alone confirm 4L0955276G compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. On the listed AUDI Q7 2010, technicians should compare the actuator orientation behind the bumper cover. A workshop comparison should additionally check whether the original cover is supplied separately from its support.
How should 4L0955276G be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the right-side order line, confirm that the vehicle is equipped with a factory headlight washer system. The order review should further retain the removed component for a direct physical comparison.
What information should accompany a 4L0955276G enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. The product-specific check for 4L0955276G should request protective inner wrapping for painted faces. Receiving staff should also retain the product label until fitment is confirmed.
Is workshop installation recommended for 4L0955276G?
Yes. A qualified workshop can access the bumper area on the Q7, transfer hoses or clips safely and test the washer system for correct operation and leaks. Before this headlight washer nozzle cover is accepted, reconnect every hose clip before filling the system. Before approval, the buyer or technician should check the headlamp lens receives an even spray.
