4L0955275G Front Left Headlight Washer Nozzle Cover for AUDI Q7 2010
Primary OE reference: 4L0955275G
Cross-reference number 1: 4L0 955 275G
Cross-reference number 2: 4L0955275G
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q7 2010
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q7
Model year: 2010
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-108
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4L0955275G Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4L0955275G is a front left headlight washer nozzle cover intended for AUDI Q7 2010. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q7
Compatibility for 4L0955275G should be confirmed against AUDI Q7 2010 and the left installation side. The review should check regional variations in headlamp-cleaning equipment, check whether the bumper is standard or sport specification, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to match the mounting pattern around the bumper aperture, compare product photographs with the removed part from several angles, and confirm whether a cap, nozzle, bracket or complete assembly is required; finally, separate mirrored left and right items during inventory selection and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-108 should be checked separately. For this headlight washer nozzle cover, compare the visible bumper-side contour, inspect the actuator barrel for impact damage, and check whether the visible part requires painting. A direct comparison with the removed part should additionally review the clip geometry on the rear face, compare the retracted position with the bumper surface, and inspect the washer outlet for blockage. Before the item is accepted, check the fluid inlet for storage contamination and review the hose spigot angle on the washer nozzle.
OE Identification and Side Confirmation
4L0955275G is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-108 is the internal item code. Match both references to the vehicle record, then retain the removed component for a direct physical comparison. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-108 begins before the bumper area is disturbed: reconnect every hose clip before filling the system and test for drips after the washer pump stops. During trial fitting, inspect the bumper opening after the trial fit, complete a final visual check under even lighting, and protect the painted bumper surface during removal. Before returning the vehicle to service, trial-fit the component before final fastening, confirm that the nozzle extends and retracts freely, and avoid forcing a mirrored part into the bumper opening.
Receiving Inspection
When AD02010-108 arrives, receiving staff should confirm that loose accessories are identified on the packing list, verify that protective plugs remain in open fluid connections, and inspect the fluid passage only with clean, non-damaging tools. Before workshop release, inspect the rear locator shape without forcing any movable section, check the cap hinge or retaining point for free movement, verify the nozzle head returns smoothly without applying excess force, and check the spring-return area where the component includes an actuator. Complete the inspection by ensuring that staff separate mirrored components immediately after carton opening, document any shortage before the receiving inspection is closed, and verify the cover contour against the approved product photograph.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4L0955275G |
| Cross-reference numbers | 4L0 955 275G 4L0955275G |
| Internal item code | AD02010-108 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2010 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q7 2010 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4L0955275G, please protect each nozzle outlet from dust during transit, request protective inner wrapping for painted faces, and state the target vehicle application. Packing instructions should provide the consignee and freight-forwarder details, confirm sample approval before mass shipment, and state the required order quantity. Before dispatch, separate left and right items on the packing list and confirm whether caps and nozzles should be supplied as pairs.
Frequently Asked Questions
Does the finish specification matter for 4L0955275G?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For item AD02010-108, the approval should compare the depth of the actuator body. The same item record should also check whether the visible part requires painting.
What information should accompany a 4L0955275G enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI Q7 2010, technicians should plug open fluid connections during packing. A workshop comparison should additionally request a packing-list breakdown by internal item code.
How should 4L0955275G be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. For the left-side order line, verify nearby parking-sensor or trim interfaces. The order review should further separate mirrored left and right items during inventory selection.
Are clips, hoses or fasteners supplied with 4L0955275G?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. The product-specific check for 4L0955275G should use dividers to prevent caps from rubbing each other. Receiving staff should also verify the packed quantity by OE reference.
Which vehicle application is listed for 4L0955275G?
4L0955275G is listed for AUDI Q7 2010. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. Before this headlight washer nozzle cover is accepted, compare the hose connection or cover hinge with the original part. Before approval, the buyer or technician should inspect the bumper cutout shape and surrounding contour.
