4L0955275 Front Left Headlight Washer Nozzle Cover for AUDI Q7 2008
Primary OE reference: 4L0955275
Cross-reference number 1: 4L0 955 275
Cross-reference number 2: 4L0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI Q7 2008
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: Q7
Model year: 2008
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-110
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4L0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4L0955275 is a front left headlight washer nozzle cover intended for AUDI Q7 2008. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for Q7
Compatibility for 4L0955275 should be confirmed against AUDI Q7 2008 and the left installation side. The review should confirm that the vehicle is equipped with a factory headlight washer system, review body-style differences within the same model generation, and check regional variations in headlamp-cleaning equipment. Use the removed part and product photographs to check the production date where model-year transitions overlap, verify the required left or right installation side, and confirm the front bumper option before ordering; finally, verify nearby parking-sensor or trim interfaces and confirm whether a cap, nozzle, bracket or complete assembly is required.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-110 should be checked separately. For this headlight washer nozzle cover, check whether the visible part requires painting, review the left-to-right mirrored geometry, and compare the support flange width. A direct comparison with the removed part should additionally inspect the actuator barrel for impact damage, check the joint between the visible cap and hidden support, and review any paint-preparation requirement before fitting. Before the item is accepted, compare the visible bumper-side contour and inspect the telescopic body for smooth movement.
OE Identification and Side Confirmation
4L0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-110 is the internal item code. Match both references to the vehicle record, then compare the hose connection or cover hinge with the original part. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-110 begins before the bumper area is disturbed: transfer reusable clips only after checking their condition and avoid forcing a mirrored part into the bumper opening. During trial fitting, keep dirt out of open washer-fluid lines, use hand pressure rather than levering narrow plastic tabs, and retain the original fasteners unless replacements are specified. Before returning the vehicle to service, trial-fit the component before final fastening, clean the hose and connector before assembly, and confirm sufficient clearance behind the bumper.
Receiving Inspection
When AD02010-110 arrives, receiving staff should confirm that small seals or clips have not remained in the wrapping, verify the cover contour against the approved product photograph, and confirm that small seals or clips have not remained in the wrapping. Before workshop release, verify the cover contour against the approved product photograph, confirm that small seals or clips have not remained in the wrapping, verify the cover contour against the approved product photograph, and confirm that small seals or clips have not remained in the wrapping. Complete the inspection by ensuring that staff verify the cover contour against the approved product photograph, confirm that small seals or clips have not remained in the wrapping, and verify the cover contour against the approved product photograph.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4L0955275 |
| Cross-reference numbers | 4L0 955 275 4L0955275 |
| Internal item code | AD02010-110 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2008 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI Q7 2008 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4L0955275, please state the target vehicle application, separate fragile actuator bodies from heavier metal parts, and provide the complete destination address or port. Packing instructions should request export-carton dimensions before freight booking, state the requested delivery schedule, and state the required order quantity. Before dispatch, list model years and bumper versions for mixed orders and confirm pallet requirements for larger quantities.
Frequently Asked Questions
Which vehicle application is listed for 4L0955275?
4L0955275 is listed for AUDI Q7 2008. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For item AD02010-110, the approval should check whether the original cover is supplied separately from its support. The same item record should also verify nearby parking-sensor or trim interfaces.
What information should accompany a 4L0955275 enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI Q7 2008, technicians should plug open fluid connections during packing. A workshop comparison should additionally identify the required installation side.
Is workshop installation recommended for 4L0955275?
Yes. A qualified workshop can access the bumper area on the Q7, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, transfer reusable clips only after checking their condition. The order review should further verify that the cover closes without rubbing the bumper.
Is 4L0955275 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. The product-specific check for 4L0955275 should confirm sample requirements before a bulk order. Receiving staff should also state any outer-carton marking requirements.
Can 4L0955275 fit every Q7 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. Before this headlight washer nozzle cover is accepted, confirm that the listed model designation matches the vehicle. Before approval, the buyer or technician should compare the hose connection or cover hinge with the original part.
