4L0 941 700A Fog Light for AUDI Q7 2010 Right
Primary OE reference: 4L0 941 700A
Product type: Fog Light
Applicable vehicle: AUDI Q7 2010
Installation position: Front bumper
Installation side: Right
Brand: AUDI
Model: Q7
Vehicle year: 2010
Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.
Housing and lens check: Check the visible lens profile, housing shape and rear clearance against the original unit.
Mounting comparison: Verify the bracket layout, locating points and fastener direction before installation.
Electrical connection: Check that the harness connector seats fully and uses the same terminal arrangement.
Lighting version: Confirm whether the original lamp uses a replaceable bulb, integrated LED or separate control hardware.
Installation guidance: Test the lighting function before completing bumper reassembly and final alignment.
Quotation information: Include the vehicle application, lamp side, OE number and quantity for accurate order matching.
4L0 941 700A Fog Light Product Overview
For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 4L0 941 700A is catalogued as a fog light for AUDI Q7 2010, installed at the right front bumper position.
4L0 941 700A — Purpose in the Lighting System
A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 4L0 941 700A on the listed Q7, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU AD04002-038.
For SKU AD04002-038, list mixed left/right quantities separately. Quoting 4L0 941 700A with the AUDI Q7 2010 and right position helps separate lighting-technology and model-year variants during packing.
AD04002-038 — OE Reference and Side Confirmation
Start with the full reference 4L0 941 700A; then verify that the listed side matches the vehicle. Item AD04002-038 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light.
4L0 941 700A — Lens, Housing and Plug Review
Use the 4L0 941 700A page photographs to confirm the lens colour and illuminated function. For electrical compatibility on SKU AD04002-038, confirm the harness reaches the lamp without tension and confirm the plug reaches its locked position without modification.
AD04002-038 — Replacement Preparation
Before securing 4L0 941 700A, inspect damaged brackets before installing the replacement. After connecting SKU AD04002-038, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.
Automotive Lighting Product Specifications
| Product type | Fog Light |
|---|---|
| Primary OE reference | 4L0 941 700A |
| Cross-reference numbers | 4L0 941 700A |
| Internal item code | AD04002-038 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2010 |
| Installation position | Front bumper |
| Installation side | Right |
| Lighting version | Match the photographed configuration |
| Product function | Vehicle exterior lighting for the stated bumper position |
Wholesale Supply and Protective Packing
For 4L0 941 700A, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU AD04002-038, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.
Frequently Asked Questions
How do I confirm 4L0 941 700A for my vehicle?
Match 4L0 941 700A, the right position, vehicle year, housing depth, mounting ears and electrical connector with the original AUDI lamp.
Why compare the bumper opening for 4L0 941 700A?
SKU AD04002-038 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.
Can model year alone confirm 4L0 941 700A fitment?
No. For SKU AD04002-038, vehicles built in the same year can use different lighting packages, so use 4L0 941 700A and the removed lamp geometry as the primary evidence.
Is 4L0 941 700A interchangeable between left and right sides?
No interchangeability should be assumed. The right housing, reflector orientation and brackets must correspond to the original bumper position.
How is the 4L0 941 700A optical surface protected for shipping?
Packing for SKU AD04002-038 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.
Request a Product-Specific Quote
Send the complete OE reference 4L0 941 700A, internal number AD04002-038, vehicle details, side, quantity and destination. Yongshang Auto can review the photographed configuration before preparing a trade quotation.
