4L0 807 434H Rear Bumper Air Deflector for AUDI Q7 2010
Product: Rear Bumper Air Deflector
Primary OE: 4L0 807 434H
Item code: AD02003-108
Cross-reference numbers:
4L0 807 434H
4L0807434H
Brand: AUDI
Model: Q7
Application reference: 2010 AUDI Q7
Position: Rear
Verification: Inspect sensor, washer, lamp, reflector, grille and tow-eye provisions against the vehicle specification.
Supply note: Provide a line-item quantity for AD02003-108 together with delivery, labelling and palletisation details.
4L0 807 434H offers an OE-centred record for panel comparison, sample approval and commercial ordering. For 2010 AUDI Q7, Yongshang Auto tracks the requested rear bumper air deflector as AD02003-108.
AD02003-108 requires an application-specific review: Mounting tabs and edge contours deserve close inspection because hidden differences can affect assembly even when the outer face appears similar. A dated photo record makes the decision easier to review if questions arise later.
bumper spoiler Matching Workflow
Fitment guidance for 4L0 807 434H. Retain the original-part label and wide-angle vehicle photographs in the approval file. This creates a traceable reference if questions arise during sample inspection. A dated photo record makes the decision easier to review if questions arise later.
The rear location on 2010 AUDI Q7 should be reviewed as follows: Use OE data as the primary filter and visual evidence as the second filter. Both should agree before a sample or bulk order is released. The purchase team can use the recorded result when confirming the order line.
Product Technical Specifications
| Product type | Rear Bumper Air Deflector |
|---|---|
| Primary OE reference | 4L0 807 434H |
| Cross-reference numbers | 4L0 807 434H |
| Internal item code | AD02003-108 |
| Vehicle brand | AUDI |
| Vehicle model | Q7 |
| Model year | 2010 |
| Installation position | Rear lower bumper area |
| Applicable vehicle | 2010 AUDI Q7 |
bumper spoiler Function in the Assembly
Functional context for 4L0 807 434H. The bumper spoiler forms the outer visible layer of the bumper system and helps restore the intended vehicle profile after repair. Its edges must align with nearby lamps, grilles and body panels. The same information helps receiving staff identify the correct carton and panel.
Application note for item AD02003-108. The styling surface can include several equipment-dependent zones. Confirming those zones early helps prevent unnecessary cutting or modification at the body shop. The purchase team can use the recorded result when confirming the order line.
Receiving, Relaxation and Alignment Check
Receiving note for carton AD02003-108. Confirm the quantity of loose covers and associated packing labels at receipt. Keep each item code linked to its carton until the fitment sample has been approved. This review is especially useful near model-year or equipment transitions.
Pre-finish check for 2010 AUDI Q7. Examine grille apertures, lamp zones, reflector locations and tow-eye access. Small damage in those areas can affect trim installation even when the main face is intact. That comparison gives the workshop a clearer basis for a pre-paint decision.
Purchase File and Packaging Discussion
A quotation for 4L0 807 434H should reflect this guidance: Identify any barcode, carton mark or language requirement in advance. The agreed label should retain both the buyer reference and the supplier item code. That comparison gives the workshop a clearer basis for a pre-paint decision.
The 3 square images attached to AD02003-108 support visual review. Confirm the delivery market and preferred transport method. Packing design can differ between sample courier movement, consolidated sea freight and full-container supply. The purchase team can use the recorded result when confirming the order line.
Frequently Asked Questions
Which inspection steps apply to OE 4L0 807 434H?
2010 AUDI Q7 is the stated reference for this page. If the removed bumper-aero part is unavailable, provide VIN details and clear photographs of the uncovered bumper assembly so the supplier can request further evidence. This sequence keeps catalogue selection separate from cosmetic preparation.
What links the panel, carton and quotation to AD02003-108?
Supplier-code context for this rear bumper air deflector. Request packing dimensions and gross-volume estimates before finalising freight. bumper spoilers and air deflectors can be lightweight but consume substantial shipment space. Keep AD02003-108 beside 4L0 807 434H in the final commercial record.
How should the workshop compare corners and equipment openings?
Panel-comparison guidance for 2010 AUDI Q7. Confirm that transferred accessories match the openings and attachment areas on the replacement bumper-aero component. Accessories are reviewed separately unless included in writing. The completed check supports a traceable discussion between buyer and supplier.
How should the repairer handle a gap problem before painting?
Finishing guidance for OE 4L0 807 434H. Use the uncoated condition to evaluate corners, upper fixings, lower mounts and trim zones before labour is committed to refinishing. Those observations should remain available during sample and bulk-order review.
How should mixed-order requirements be stated for AD02003-108?
Wholesale request for AD02003-108. Describe inspection criteria for visible surface, tabs, openings and general contour, then state how the approved result will release production. Those observations should remain available during sample and bulk-order review.
Request a Quote for 4L0 807 434H
Ask for pre-shipment photographs when the purchase programme requires packaging approval. The record should show item labels, carton condition and loading arrangement. For Yongshang Auto’s review, connect 4L0 807 434H and AD02003-108 with the intended 2010 AUDI Q7, requested quantity and delivery market.
