4K0955275 Front Left Headlight Washer Nozzle Cover for AUDI A6 2019

4K0955275 Front Left Headlight Washer Nozzle Cover Product Overview

The component shown under 4K0955275 is a front left headlight washer nozzle cover intended for AUDI A6 2019. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for A6

Compatibility for 4K0955275 should be confirmed against AUDI A6 2019 and the left installation side. The review should confirm that the vehicle is equipped with a factory headlight washer system, review body-style differences within the same model generation, and check regional variations in headlamp-cleaning equipment. Use the removed part and product photographs to check the production date where model-year transitions overlap, verify the required left or right installation side, and confirm the front bumper option before ordering; finally, verify nearby parking-sensor or trim interfaces and confirm whether a cap, nozzle, bracket or complete assembly is required.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of AD02010-045 should be checked separately. For this headlight washer nozzle cover, check the fluid inlet for storage contamination, review the sealing area around the hose connection, and compare the distance between mounting points. A direct comparison with the removed part should additionally inspect the washer outlet for blockage, check each molded locator against the original component, and review the bracket stiffness and screw seats. Before the item is accepted, compare the retracted position with the bumper surface and inspect the molded tabs for cracks or distortion.

OE Identification and Side Confirmation

4K0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-045 is the internal item code. Match both references to the vehicle record, then compare the hose connection or cover hinge with the original part. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-045 begins before the bumper area is disturbed: verify that the cover closes without rubbing the bumper and complete a final visual check under even lighting. During trial fitting, align the cover flush with the bumper surface, replace distorted clips or damaged seals, and inspect nearby wiring and sensors before refitting trim. Before returning the vehicle to service, test for drips after the washer pump stops, reconfirm the OE number before discarding the packaging, and route the washer hose away from sharp edges.

Receiving Inspection

When AD02010-045 arrives, receiving staff should check painted or primed surfaces under neutral lighting, check the carton partition for evidence of part-to-part contact, and check painted or primed surfaces under neutral lighting. Before workshop release, check the carton partition for evidence of part-to-part contact, check painted or primed surfaces under neutral lighting, check the carton partition for evidence of part-to-part contact, and check painted or primed surfaces under neutral lighting. Complete the inspection by ensuring that staff check the carton partition for evidence of part-to-part contact, check painted or primed surfaces under neutral lighting, and check the carton partition for evidence of part-to-part contact.

Product Technical Specifications

Wholesale Supply and Protective Packing

For a quotation or repeat order of 4K0955275, please provide the complete destination address or port, request export-carton dimensions before freight booking, and state the requested delivery schedule. Packing instructions should state the required order quantity, list model years and bumper versions for mixed orders, and confirm pallet requirements for larger quantities. Before dispatch, protect each nozzle outlet from dust during transit and confirm sample requirements before a bulk order.

Frequently Asked Questions

Is workshop installation recommended for 4K0955275?

Yes. A qualified workshop can access the bumper area on the A6, transfer hoses or clips safely and test the washer system for correct operation and leaks. For item AD02010-045, the approval should test the spray direction before returning the vehicle. The same item record should also transfer reusable clips only after checking their condition.

Which side uses 4K0955275?

This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. On the listed AUDI A6 2019, technicians should compare the retracted position with the bumper surface. A workshop comparison should additionally check the complete supplied scope against the photographs.

Is 4K0955275 a complete headlight washer system?

No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the left-side order line, state the target vehicle application. The order review should further use dividers to prevent caps from rubbing each other.

Does the finish specification matter for 4K0955275?

Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. The product-specific check for 4K0955275 should review any paint-preparation requirement before fitting. Receiving staff should also inspect the actuator barrel for impact damage.

Can 4K0955275 fit every A6 model year?

No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. Before this headlight washer nozzle cover is accepted, confirm that the vehicle is equipped with a factory headlight washer system. Before approval, the buyer or technician should verify nearby parking-sensor or trim interfaces.