4H0955281B Front Left Headlight Washer Nozzle Cover for AUDI A8 2016
Primary OE reference: 4H0955281B
Cross-reference number 1: 4H0 955 281B
Cross-reference number 2: 4H0955281B
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A8 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A8
Model year: 2016
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-073
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4H0955281B Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4H0955281B is a front left headlight washer nozzle cover intended for AUDI A8 2016. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A8
Compatibility for 4H0955281B should be confirmed against AUDI A8 2016 and the left installation side. The review should verify nearby parking-sensor or trim interfaces, confirm the front bumper option before ordering, and verify the required left or right installation side. Use the removed part and product photographs to check the production date where model-year transitions overlap, check regional variations in headlamp-cleaning equipment, and review body-style differences within the same model generation; finally, confirm that the vehicle is equipped with a factory headlight washer system and match the mounting pattern around the bumper aperture.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-073 should be checked separately. For this headlight washer nozzle cover, check the bumper-facing surface for transport marks, review any paint-preparation requirement before fitting, and compare the cap-to-support engagement method. A direct comparison with the removed part should additionally inspect the washer outlet for blockage, check the complete supplied scope against the photographs, and review the spring-loaded return features where fitted. Before the item is accepted, compare the support flange width and inspect the molded tabs for cracks or distortion.
OE Identification and Side Confirmation
4H0955281B is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-073 is the internal item code. Match both references to the vehicle record, then inspect the bumper cutout shape and surrounding contour. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-073 begins before the bumper area is disturbed: reconnect every hose clip before filling the system and route the washer hose away from sharp edges. During trial fitting, reconnect every hose clip before filling the system, route the washer hose away from sharp edges, and reconnect every hose clip before filling the system. Before returning the vehicle to service, route the washer hose away from sharp edges, reconnect every hose clip before filling the system, and route the washer hose away from sharp edges.
Receiving Inspection
When AD02010-073 arrives, receiving staff should confirm that loose accessories are identified on the packing list, verify the supplied scope before discarding dividers or inner bags, and confirm the bumper-facing edge has not been compressed in transit. Before workshop release, separate mirrored components immediately after carton opening, compare the visible surface texture with the ordered specification, inspect projecting pins before placing the item on a hard bench, and confirm the internal item code before mixed stock is shelved. Complete the inspection by ensuring that staff verify the nozzle head returns smoothly without applying excess force, protect the visible face again after inspection is complete, and check molded tabs for whitening, cracks or transport stress.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4H0955281B |
| Cross-reference numbers | 4H0 955 281B 4H0955281B |
| Internal item code | AD02010-073 |
| Vehicle brand | AUDI |
| Vehicle model | A8 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A8 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4H0955281B, please protect each nozzle outlet from dust during transit, confirm pallet requirements for larger quantities, and list model years and bumper versions for mixed orders. Packing instructions should state the required order quantity, state the requested delivery schedule, and request export-carton dimensions before freight booking. Before dispatch, provide the complete destination address or port and separate fragile actuator bodies from heavier metal parts.
Frequently Asked Questions
How should 4H0955281B be packed for export?
The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item AD02010-073, the approval should protect hose spigots and projecting tabs. The same item record should also state the requested delivery schedule.
Why must left and right versions of 4H0955281B be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed AUDI A8 2016, technicians should compare the depth of the actuator body. A workshop comparison should additionally check the fluid inlet for storage contamination.
Are clips, hoses or fasteners supplied with 4H0955281B?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For the left-side order line, provide the complete destination address or port. The order review should further use dividers to prevent caps from rubbing each other.
Which side uses 4H0955281B?
This front left headlight washer nozzle cover is catalogued for the left side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 4H0955281B should check each molded locator against the original component. Receiving staff should also compare the visible bumper-side contour.
Is workshop installation recommended for 4H0955281B?
Yes. A qualified workshop can access the bumper area on the A8, transfer hoses or clips safely and test the washer system for correct operation and leaks. Before this headlight washer nozzle cover is accepted, tighten bracket hardware only after alignment. Before approval, the buyer or technician should keep dirt out of open washer-fluid lines.
