4H0955101A Front Left Headlight Washer Nozzle for AUDI A8 2011
Primary OE reference: 4H0955101A
Cross-reference number 1: 4H0 955 101A
Cross-reference number 2: 4H0955101A
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI A8 2011
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A8
Model year: 2011
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-076
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4H0955101A Front Left Headlight Washer Nozzle Product Overview
The component shown under 4H0955101A is a front left headlight washer nozzle intended for AUDI A8 2011. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A8
Compatibility for 4H0955101A should be confirmed against AUDI A8 2011 and the left installation side. The review should verify the required left or right installation side, verify that the OE reference is not for the opposite side, and compare product photographs with the removed part from several angles. Use the removed part and product photographs to compare the washer opening beside the correct headlamp, check regional variations in headlamp-cleaning equipment, and use the full OE number, not a partial family reference; finally, compare the hose connection or cover hinge with the original part and match the connector and fluid inlet position where applicable.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-076 should be checked separately. For this headlight washer nozzle, compare the visible bumper-side contour, review the left-to-right mirrored geometry, and check the cap hinge or retaining point. A direct comparison with the removed part should additionally inspect the washer outlet for blockage, compare the outer surface profile with the bumper opening, and review the engagement of the cover with the nozzle stem. Before the item is accepted, check the nozzle outlet orientation and inspect the actuator barrel for impact damage.
OE Identification and Side Confirmation
4H0955101A is the primary OE identity for this left front left headlight washer nozzle, while AD02010-076 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-076 begins before the bumper area is disturbed: transfer reusable clips only after checking their condition and test for drips after the washer pump stops. During trial fitting, tighten bracket hardware only after alignment, trial-fit the component before final fastening, and check the headlamp lens receives an even spray. Before returning the vehicle to service, follow the vehicle workshop procedure for bumper removal, align the cover flush with the bumper surface, and photograph the original routing before disassembly.
Receiving Inspection
When AD02010-076 arrives, receiving staff should confirm that small seals or clips have not remained in the wrapping, verify the nozzle head returns smoothly without applying excess force, and confirm the nozzle outlet is clean and unobstructed. Before workshop release, record carton damage before the item is moved to workshop stock, retain the OE label until the washer system has passed its function test, inspect projecting pins before placing the item on a hard bench, and inspect the fluid passage only with clean, non-damaging tools. Complete the inspection by ensuring that staff review the hose spigot for impact damage or distortion, check painted or primed surfaces under neutral lighting, and separate mirrored components immediately after carton opening.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4H0955101A |
| Cross-reference numbers | 4H0 955 101A 4H0955101A |
| Internal item code | AD02010-076 |
| Vehicle brand | AUDI |
| Vehicle model | A8 |
| Model year | 2011 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A8 2011 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4H0955101A, please state the target vehicle application, request barcode or private-label details when needed, and confirm the preferred incoterm. Packing instructions should confirm pallet requirements for larger quantities, use dividers to prevent caps from rubbing each other, and state any outer-carton marking requirements. Before dispatch, confirm the acceptable delivery window and state the required order quantity.
Frequently Asked Questions
How should 4H0955101A be packed for export?
The front left headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item AD02010-076, the approval should confirm whether the visible cover needs a primed or finished surface. The same item record should also use dividers to prevent caps from rubbing each other.
How should 4H0955101A be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. On the listed AUDI A8 2011, technicians should compare the washer opening beside the correct headlamp. A workshop comparison should additionally compare the complete OE marking with the removed washer component.
Can product photographs alone confirm 4H0955101A compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. For the left-side order line, confirm that the vehicle is equipped with a factory headlight washer system. The order review should further confirm that the listed model designation matches the vehicle.
Which vehicle application is listed for 4H0955101A?
4H0955101A is listed for AUDI A8 2011. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. The product-specific check for 4H0955101A should review facelift and pre-facelift washer layouts. Receiving staff should also compare the actuator orientation behind the bumper cover.
Is 4H0955101A a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle is accepted, list model years and bumper versions for mixed orders. Before approval, the buyer or technician should confirm the acceptable delivery window.
