4G8955101B Front Left Headlight Washer Nozzle for AUDI A7 2016
Primary OE reference: 4G8955101B
Cross-reference number 1: 4G8 955 101 B
Cross-reference number 2: 4G8955101B
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI A7 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A7
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-063
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G8955101B Front Left Headlight Washer Nozzle Product Overview
The component shown under 4G8955101B is a front left headlight washer nozzle intended for AUDI A7 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A7
Compatibility for 4G8955101B should be confirmed against AUDI A7 2016 and the left installation side. The review should compare the complete OE marking with the removed washer component, compare the actuator orientation behind the bumper cover, and confirm the front bumper option before ordering. Use the removed part and product photographs to compare the hose connection or cover hinge with the original part, compare every tab, clip seat and locating shoulder, and review facelift and pre-facelift washer layouts; finally, compare the nozzle travel direction with the vehicle-side installation and confirm that the vehicle is equipped with a factory headlight washer system.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-063 should be checked separately. For this headlight washer nozzle, review the hose spigot angle on the washer nozzle, compare the support flange width, and inspect the base bracket around every locating slot. A direct comparison with the removed part should additionally check the joint between the visible cap and hidden support, review the sealing area around the hose connection, and compare the visible bumper-side contour. Before the item is accepted, inspect the washer outlet for blockage and check the nozzle outlet orientation.
OE Identification and Side Confirmation
4G8955101B is the primary OE identity for this left front left headlight washer nozzle, while AD02010-063 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-063 begins before the bumper area is disturbed: check the system for leaks after reconnection and test the spray direction before returning the vehicle. During trial fitting, avoid forcing a mirrored part into the bumper opening, clean the hose and connector before assembly, and replace distorted clips or damaged seals. Before returning the vehicle to service, support the bumper cover while accessing the hidden actuator, verify that the cap remains attached through a full washer cycle, and tighten bracket hardware only after alignment.
Receiving Inspection
When AD02010-063 arrives, receiving staff should check the carton partition for evidence of part-to-part contact, confirm the nozzle outlet is clean and unobstructed, and verify the supplied scope before discarding dividers or inner bags. Before workshop release, compare the visible surface texture with the ordered specification, verify the nozzle head returns smoothly without applying excess force, compare left and right orientation before removing protective wrapping, and inspect mounting holes for flash, blockage or edge damage. Complete the inspection by ensuring that staff confirm that small seals or clips have not remained in the wrapping, compare the supplied side with the vehicle repair order, and check the spring-return area where the component includes an actuator.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4G8955101B |
| Cross-reference numbers | 4G8 955 101 B 4G8955101B |
| Internal item code | AD02010-063 |
| Vehicle brand | AUDI |
| Vehicle model | A7 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A7 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G8955101B, please retain the product label until fitment is confirmed, state the requested delivery schedule, and state any outer-carton marking requirements. Packing instructions should protect each nozzle outlet from dust during transit, identify the required installation side, and protect hose spigots and projecting tabs. Before dispatch, confirm whether caps and nozzles should be supplied as pairs and confirm the preferred incoterm.
Frequently Asked Questions
Can 4G8955101B fit every A7 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-063, the approval should compare the actuator orientation behind the bumper cover. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Should the washer system be tested after fitting 4G8955101B?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. On the listed AUDI A7 2016, technicians should check the system for leaks after reconnection. A workshop comparison should additionally compare the installed height with the opposite side.
Which vehicle application is listed for 4G8955101B?
4G8955101B is listed for AUDI A7 2016. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For the left-side order line, confirm the destination-market equipment specification. The order review should further confirm the destination-market equipment specification.
Is a sample order available for 4G8955101B?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. The product-specific check for 4G8955101B should list model years and bumper versions for mixed orders. Receiving staff should also separate left and right items on the packing list.
Is 4G8955101B a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle is accepted, confirm sample approval before mass shipment. Before approval, the buyer or technician should check carton labels at receiving.
