4G0955276F Front Right Headlight Washer Nozzle Cover for AUDI A6 2016
Primary OE reference: 4G0955276F
Cross-reference number 1: 4G0 955 276F
Cross-reference number 2: 4G0955276F
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2016
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A6
Model year: 2016
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-052
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G0955276F Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 4G0955276F is a front right headlight washer nozzle cover intended for AUDI A6 2016. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4G0955276F should be confirmed against AUDI A6 2016 and the right installation side. The review should compare the actuator orientation behind the bumper cover, review body-style differences within the same model generation, and review facelift and pre-facelift washer layouts. Use the removed part and product photographs to review painted, primed and unpainted finish requirements, check the washer jet position relative to the headlamp lens, and match the mounting pattern around the bumper aperture; finally, verify nearby parking-sensor or trim interfaces and compare the complete OE marking with the removed washer component.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-052 should be checked separately. For this headlight washer nozzle cover, compare the support flange width, review the clip geometry on the rear face, and check each molded locator against the original component. A direct comparison with the removed part should additionally inspect the base bracket around every locating slot, compare the cap perimeter and corner radii, and review the spring-loaded return features where fitted. Before the item is accepted, check the joint between the visible cap and hidden support and inspect narrow plastic tips before installation.
OE Identification and Side Confirmation
4G0955276F is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-052 is the internal item code. Match both references to the vehicle record, then verify the required left or right installation side. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-052 begins before the bumper area is disturbed: reconfirm the OE number before discarding the packaging and compare the installed height with the opposite side. During trial fitting, clean the hose and connector before assembly, work with the washer system depressurized, and reconnect every hose clip before filling the system. Before returning the vehicle to service, replace distorted clips or damaged seals, protect the painted bumper surface during removal, and use hand pressure rather than levering narrow plastic tabs.
Receiving Inspection
When AD02010-052 arrives, receiving staff should check the cap hinge or retaining point for free movement, measure the main mounting span when two bumper versions appear similar, and protect the visible face again after inspection is complete. Before workshop release, verify the cover contour against the approved product photograph, compare connector depth and hose angle with the retained original part, verify that protective plugs remain in open fluid connections, and confirm the internal item code before mixed stock is shelved. Complete the inspection by ensuring that staff match the item label to the purchase order and OE reference, check the spring-return area where the component includes an actuator, and inspect mounting holes for flash, blockage or edge damage.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4G0955276F |
| Cross-reference numbers | 4G0 955 276F 4G0955276F |
| Internal item code | AD02010-052 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A6 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G0955276F, please protect hose spigots and projecting tabs, request export-carton dimensions before freight booking, and identify project stock and service stock separately. Packing instructions should retain the product label until fitment is confirmed, request moisture protection for sea freight, and separate fragile actuator bodies from heavier metal parts. Before dispatch, confirm sample approval before mass shipment and request replacement-part documentation when required.
Frequently Asked Questions
Is a sample order available for 4G0955276F?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item AD02010-052, the approval should separate left and right items on the packing list. The same item record should also confirm the acceptable delivery window.
Does the finish specification matter for 4G0955276F?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI A6 2016, technicians should inspect the washer outlet for blockage. A workshop comparison should additionally review the engagement of the cover with the nozzle stem.
Why must left and right versions of 4G0955276F be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. For the right-side order line, check the bumper-facing surface for transport marks. The order review should further check each molded locator against the original component.
Is workshop installation recommended for 4G0955276F?
Yes. A qualified workshop can access the bumper area on the A6, transfer hoses or clips safely and test the washer system for correct operation and leaks. The product-specific check for 4G0955276F should disconnect the fluid hose without twisting the plastic spigot. Receiving staff should also photograph the original routing before disassembly.
Which side uses 4G0955276F?
This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. Before this headlight washer nozzle cover is accepted, check each molded locator against the original component. Before approval, the buyer or technician should check the bumper-facing surface for transport marks.
