4G0955275H Front Left Headlight Washer Nozzle Cover for AUDI A6 2018
Primary OE reference: 4G0955275H
Cross-reference number 1: 4G0 955 275H
Cross-reference number 2: 4G0955275H
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2018
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2018
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-047
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G0955275H Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4G0955275H is a front left headlight washer nozzle cover intended for AUDI A6 2018. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4G0955275H should be confirmed against AUDI A6 2018 and the left installation side. The review should match the mounting pattern around the bumper aperture, compare the hose connection or cover hinge with the original part, and check the production date where model-year transitions overlap. Use the removed part and product photographs to retain the removed component for a direct physical comparison, confirm whether a cap, nozzle, bracket or complete assembly is required, and compare the actuator orientation behind the bumper cover; finally, verify that the OE reference is not for the opposite side and inspect the bumper cutout shape and surrounding contour.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-047 should be checked separately. For this headlight washer nozzle cover, review the left-to-right mirrored geometry, check each molded locator against the original component, and inspect the hose connector for ovality. A direct comparison with the removed part should additionally compare the visible bumper-side contour, review the clip geometry on the rear face, and check the fluid inlet for storage contamination. Before the item is accepted, inspect the rear reinforcement ribs and compare the support flange width.
OE Identification and Side Confirmation
4G0955275H is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-047 is the internal item code. Match both references to the vehicle record, then check whether the original cover is supplied separately from its support. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-047 begins before the bumper area is disturbed: complete a final visual check under even lighting and confirm that the nozzle extends and retracts freely. During trial fitting, follow the vehicle workshop procedure for bumper removal, verify that the cover closes without rubbing the bumper, and work with the washer system depressurized. Before returning the vehicle to service, test the spray direction before returning the vehicle, confirm sufficient clearance behind the bumper, and check the headlamp lens receives an even spray.
Receiving Inspection
When AD02010-047 arrives, receiving staff should separate mirrored components immediately after carton opening, confirm the nozzle outlet is clean and unobstructed, and check the actuator body for straightness before trial installation. Before workshop release, check the spring-return area where the component includes an actuator, measure the main mounting span when two bumper versions appear similar, check painted or primed surfaces under neutral lighting, and verify the nozzle head returns smoothly without applying excess force. Complete the inspection by ensuring that staff confirm the bumper-facing edge has not been compressed in transit, match the item label to the purchase order and OE reference, and check the cap hinge or retaining point for free movement.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4G0955275H |
| Cross-reference numbers | 4G0 955 275H 4G0955275H |
| Internal item code | AD02010-047 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2018 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2018 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G0955275H, please plug open fluid connections during packing, request moisture protection for sea freight, and state the required order quantity. Packing instructions should state the target vehicle application, request a packing-list breakdown by internal item code, and confirm whether the visible cover needs a primed or finished surface. Before dispatch, retain the product label until fitment is confirmed and confirm the acceptable delivery window.
Frequently Asked Questions
What should be inspected when 4G0955275H arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For item AD02010-047, the approval should check the spring-return area where the component includes an actuator. The same item record should also review the production finish against the approved sample.
Can 4G0955275H fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed AUDI A6 2018, technicians should verify the required left or right installation side. A workshop comparison should additionally verify the required left or right installation side.
Is 4G0955275H a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. For the left-side order line, confirm sample approval before mass shipment. The order review should further use dividers to prevent caps from rubbing each other.
Why must left and right versions of 4G0955275H be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 4G0955275H should inspect the actuator barrel for impact damage. Receiving staff should also inspect the base bracket around every locating slot.
Can product photographs alone confirm 4G0955275H compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, verify nearby parking-sensor or trim interfaces. Before approval, the buyer or technician should review facelift and pre-facelift washer layouts.
