4G0955275F Front Left Headlight Washer Nozzle Cover for AUDI A6 2016
Primary OE reference: 4G0955275F
Cross-reference number 1: 4G0 955 275F
Cross-reference number 2: 4G0955275F
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2016
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-051
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G0955275F Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4G0955275F is a front left headlight washer nozzle cover intended for AUDI A6 2016. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4G0955275F should be confirmed against AUDI A6 2016 and the left installation side. The review should compare the washer opening beside the correct headlamp, inspect the bumper cutout shape and surrounding contour, and review body-style differences within the same model generation. Use the removed part and product photographs to verify the required left or right installation side, confirm whether a cap, nozzle, bracket or complete assembly is required, and confirm that the listed model designation matches the vehicle; finally, compare the complete OE marking with the removed washer component and compare the hose connection or cover hinge with the original part.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-051 should be checked separately. For this headlight washer nozzle cover, review the sealing area around the hose connection, check the joint between the visible cap and hidden support, and inspect the base bracket around every locating slot. A direct comparison with the removed part should additionally compare the support flange width, review the hose spigot angle on the washer nozzle, and check whether the visible part requires painting. Before the item is accepted, inspect the hose connector for ovality and compare the cap-to-support engagement method.
OE Identification and Side Confirmation
4G0955275F is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-051 is the internal item code. Match both references to the vehicle record, then verify nearby parking-sensor or trim interfaces. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-051 begins before the bumper area is disturbed: test for drips after the washer pump stops and clean the hose and connector before assembly. During trial fitting, confirm that no hose is pinched behind the bumper, tighten bracket hardware only after alignment, and work with the washer system depressurized. Before returning the vehicle to service, inspect nearby wiring and sensors before refitting trim, trial-fit the component before final fastening, and reconnect every hose clip before filling the system.
Receiving Inspection
When AD02010-051 arrives, receiving staff should verify the supplied scope before discarding dividers or inner bags, retain the OE label until the washer system has passed its function test, and check the actuator body for straightness before trial installation. Before workshop release, confirm the internal item code before mixed stock is shelved, compare the supplied side with the vehicle repair order, confirm the nozzle outlet is clean and unobstructed, and inspect the rear locator shape without forcing any movable section. Complete the inspection by ensuring that staff compare connector depth and hose angle with the retained original part, separate mirrored components immediately after carton opening, and confirm that small seals or clips have not remained in the wrapping.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4G0955275F |
| Cross-reference numbers | 4G0 955 275F 4G0955275F |
| Internal item code | AD02010-051 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G0955275F, please send photographs of the removed washer part, include the full OE reference on the purchase order, and identify the required installation side. Packing instructions should confirm whether the visible cover needs a primed or finished surface, request protective inner wrapping for painted faces, and separate left and right items on the packing list. Before dispatch, plug open fluid connections during packing and protect hose spigots and projecting tabs.
Frequently Asked Questions
Is a sample order available for 4G0955275F?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For item AD02010-051, the approval should confirm the acceptable delivery window. The same item record should also confirm the preferred incoterm.
Are clips, hoses or fasteners supplied with 4G0955275F?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI A6 2016, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally confirm the preferred incoterm.
Is workshop installation recommended for 4G0955275F?
Yes. A qualified workshop can access the bumper area on the A6, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, tighten bracket hardware only after alignment. The order review should further verify that the cover closes without rubbing the bumper.
How should 4G0955275F be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 4G0955275F should check the washer jet position relative to the headlamp lens. Receiving staff should also compare the actuator orientation behind the bumper cover.
Can 4G0955275F fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. Before this headlight washer nozzle cover is accepted, check whether the original cover is supplied separately from its support. Before approval, the buyer or technician should check whether the original cover is supplied separately from its support.
