4G0955102 Front Right Headlight Washer Nozzle for AUDI A6 2016
Primary OE reference: 4G0955102
Cross-reference number 1: 4G0 955 102
Cross-reference number 2: 4G0955102
Product type: Front Right Headlight Washer Nozzle
Vehicle application: AUDI A6 2016
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A6
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-050
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G0955102 Front Right Headlight Washer Nozzle Product Overview
The component shown under 4G0955102 is a front right headlight washer nozzle intended for AUDI A6 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4G0955102 should be confirmed against AUDI A6 2016 and the right installation side. The review should separate mirrored left and right items during inventory selection, compare the washer opening beside the correct headlamp, and compare the actuator orientation behind the bumper cover. Use the removed part and product photographs to match the connector and fluid inlet position where applicable, check the washer jet position relative to the headlamp lens, and check whether the bumper is standard or sport specification; finally, retain the removed component for a direct physical comparison and compare the nozzle travel direction with the vehicle-side installation.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-050 should be checked separately. For this headlight washer nozzle, check the nozzle outlet orientation, review the left-to-right mirrored geometry, and compare the retracted position with the bumper surface. A direct comparison with the removed part should additionally inspect the base bracket around every locating slot, check the bumper-facing surface for transport marks, and review any paint-preparation requirement before fitting. Before the item is accepted, compare the cap-to-support engagement method and inspect the washer outlet for blockage.
OE Identification and Side Confirmation
4G0955102 is the primary OE identity for this right front right headlight washer nozzle, while AD02010-050 is the internal item code. Match both references to the vehicle record, then review facelift and pre-facelift washer layouts. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-050 begins before the bumper area is disturbed: inspect nearby wiring and sensors before refitting trim and disconnect the fluid hose without twisting the plastic spigot. During trial fitting, inspect nearby wiring and sensors before refitting trim, disconnect the fluid hose without twisting the plastic spigot, and inspect nearby wiring and sensors before refitting trim. Before returning the vehicle to service, disconnect the fluid hose without twisting the plastic spigot, inspect nearby wiring and sensors before refitting trim, and disconnect the fluid hose without twisting the plastic spigot.
Receiving Inspection
When AD02010-050 arrives, receiving staff should compare left and right orientation before removing protective wrapping, inspect the rear locator shape without forcing any movable section, and check painted or primed surfaces under neutral lighting. Before workshop release, inspect mounting holes for flash, blockage or edge damage, retain the OE label until the washer system has passed its function test, verify that protective plugs remain in open fluid connections, and confirm that small seals or clips have not remained in the wrapping. Complete the inspection by ensuring that staff measure the main mounting span when two bumper versions appear similar, document any shortage before the receiving inspection is closed, and compare the supplied side with the vehicle repair order.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4G0955102 |
| Cross-reference numbers | 4G0 955 102 4G0955102 |
| Internal item code | AD02010-050 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A6 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G0955102, please verify the packed quantity by OE reference, retain the product label until fitment is confirmed, and separate left and right items on the packing list. Packing instructions should request replacement-part documentation when required, confirm the preferred incoterm, and plug open fluid connections during packing. Before dispatch, confirm the acceptable delivery window and provide the consignee and freight-forwarder details.
Frequently Asked Questions
Which vehicle application is listed for 4G0955102?
4G0955102 is listed for AUDI A6 2016. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. For item AD02010-050, the approval should verify the required left or right installation side. The same item record should also confirm that the vehicle is equipped with a factory headlight washer system.
Why must left and right versions of 4G0955102 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. On the listed AUDI A6 2016, technicians should check the bumper-facing surface for transport marks. A workshop comparison should additionally compare the support flange width.
How should 4G0955102 be packed for export?
The front right headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, protect each nozzle outlet from dust during transit. The order review should further use dividers to prevent caps from rubbing each other.
Which side uses 4G0955102?
This front right headlight washer nozzle is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. The product-specific check for 4G0955102 should compare the distance between mounting points. Receiving staff should also check whether the visible part requires painting.
Can 4G0955102 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. Before this headlight washer nozzle is accepted, separate mirrored left and right items during inventory selection. Before approval, the buyer or technician should review facelift and pre-facelift washer layouts.
