4G0955101 Front Left Headlight Washer Nozzle for AUDI A6 2016
Primary OE reference: 4G0955101
Cross-reference number 1: 4G0 955 101
Cross-reference number 2: 4G0955101
Product type: Front Left Headlight Washer Nozzle
Vehicle application: AUDI A6 2016
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2016
Product function: Directs washer fluid toward the headlamp lens as part of the vehicle headlight-cleaning system.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
System check: After installation, check hose routing, nozzle movement, spray direction and fluid leakage.
Internal item code: AD02010-049
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4G0955101 Front Left Headlight Washer Nozzle Product Overview
The component shown under 4G0955101 is a front left headlight washer nozzle intended for AUDI A6 2016. The washer nozzle receives pressurized fluid, moves toward the headlamp where applicable and directs spray across the lens surface. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4G0955101 should be confirmed against AUDI A6 2016 and the left installation side. The review should inspect the bumper cutout shape and surrounding contour, compare the nozzle travel direction with the vehicle-side installation, and confirm that the listed model designation matches the vehicle. Use the removed part and product photographs to review body-style differences within the same model generation, check the washer jet position relative to the headlamp lens, and compare the complete OE marking with the removed washer component; finally, verify the required left or right installation side and compare the washer opening beside the correct headlamp.
Headlight Washer Nozzle Function and Design Notes
The visible and hidden interfaces of AD02010-049 should be checked separately. For this headlight washer nozzle, compare the cap perimeter and corner radii, inspect the molded tabs for cracks or distortion, and check the nozzle outlet orientation. A direct comparison with the removed part should additionally review the sealing area around the hose connection, compare the support flange width, and inspect the hose connector for ovality. Before the item is accepted, check the cap hinge or retaining point and review the spring-loaded return features where fitted.
OE Identification and Side Confirmation
4G0955101 is the primary OE identity for this left front left headlight washer nozzle, while AD02010-049 is the internal item code. Match both references to the vehicle record, then confirm the destination-market equipment specification. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-049 begins before the bumper area is disturbed: align the cover flush with the bumper surface and follow the vehicle workshop procedure for bumper removal. During trial fitting, check the headlamp lens receives an even spray, trial-fit the component before final fastening, and tighten bracket hardware only after alignment. Before returning the vehicle to service, test for drips after the washer pump stops, transfer reusable clips only after checking their condition, and verify that the cap remains attached through a full washer cycle.
Receiving Inspection
When AD02010-049 arrives, receiving staff should review the production finish against the approved sample, inspect mounting holes for flash, blockage or edge damage, and confirm the nozzle outlet is clean and unobstructed. Before workshop release, measure the main mounting span when two bumper versions appear similar, confirm the bumper-facing edge has not been compressed in transit, review the hose spigot for impact damage or distortion, and confirm the internal item code before mixed stock is shelved. Complete the inspection by ensuring that staff photograph the received item if the vehicle fitment is still pending, compare left and right orientation before removing protective wrapping, and check the carton partition for evidence of part-to-part contact.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle |
|---|---|
| Primary OE reference | 4G0955101 |
| Cross-reference numbers | 4G0 955 101 4G0955101 |
| Internal item code | AD02010-049 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2016 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2016 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4G0955101, please identify project stock and service stock separately, identify painted and unpainted variants on separate lines, and identify project stock and service stock separately. Packing instructions should identify painted and unpainted variants on separate lines, identify project stock and service stock separately, and identify painted and unpainted variants on separate lines. Before dispatch, identify project stock and service stock separately and identify painted and unpainted variants on separate lines.
Frequently Asked Questions
Does the finish specification matter for 4G0955101?
Yes. A visible headlight washer nozzle may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For item AD02010-049, the approval should compare the visible bumper-side contour. The same item record should also check the nozzle outlet orientation.
Are clips, hoses or fasteners supplied with 4G0955101?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI A6 2016, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally separate left and right items on the packing list.
Can 4G0955101 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For the left-side order line, verify nearby parking-sensor or trim interfaces. The order review should further compare the hose connection or cover hinge with the original part.
How should 4G0955101 be packed for export?
The front left headlight washer nozzle should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. The product-specific check for 4G0955101 should confirm sample approval before mass shipment. Receiving staff should also check carton labels at receiving.
What should be inspected when 4G0955101 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. Before this headlight washer nozzle is accepted, check the cap hinge or retaining point for free movement. Before approval, the buyer or technician should inspect the visible cover face for scratches or pressure marks.
