4F0955276B Front Right Headlight Washer Nozzle Cover for AUDI A6 2009
Primary OE reference: 4F0955276B
Cross-reference number 1: 4F0 955 276B
Cross-reference number 2: 4F0955276B
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2009
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A6
Model year: 2009
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-058
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4F0955276B Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 4F0955276B is a front right headlight washer nozzle cover intended for AUDI A6 2009. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4F0955276B should be confirmed against AUDI A6 2009 and the right installation side. The review should compare product photographs with the removed part from several angles, use the full OE number, not a partial family reference, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to check whether the bumper is standard or sport specification, confirm the destination-market equipment specification, and check the production date where model-year transitions overlap; finally, compare the actuator orientation behind the bumper cover and review painted, primed and unpainted finish requirements.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-058 should be checked separately. For this headlight washer nozzle cover, check the complete supplied scope against the photographs, review the clip geometry on the rear face, and compare the depth of the actuator body. A direct comparison with the removed part should additionally inspect the washer outlet for blockage, check the joint between the visible cap and hidden support, and review the hose spigot angle on the washer nozzle. Before the item is accepted, compare the cap-to-support engagement method and inspect the rear reinforcement ribs.
OE Identification and Side Confirmation
4F0955276B is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-058 is the internal item code. Match both references to the vehicle record, then check the washer jet position relative to the headlamp lens. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-058 begins before the bumper area is disturbed: confirm that the nozzle extends and retracts freely and confirm sufficient clearance behind the bumper. During trial fitting, inspect the bumper opening after the trial fit, route the washer hose away from sharp edges, and keep dirt out of open washer-fluid lines. Before returning the vehicle to service, photograph the original routing before disassembly, align the cover flush with the bumper surface, and follow the vehicle workshop procedure for bumper removal.
Receiving Inspection
When AD02010-058 arrives, receiving staff should confirm the internal item code before mixed stock is shelved, photograph the received item if the vehicle fitment is still pending, and compare left and right orientation before removing protective wrapping. Before workshop release, check the carton partition for evidence of part-to-part contact, retain the OE label until the washer system has passed its function test, verify the cover contour against the approved product photograph, and document any shortage before the receiving inspection is closed. Complete the inspection by ensuring that staff separate mirrored components immediately after carton opening, check the spring-return area where the component includes an actuator, and verify the nozzle head returns smoothly without applying excess force.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4F0955276B |
| Cross-reference numbers | 4F0 955 276B 4F0955276B |
| Internal item code | AD02010-058 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2009 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A6 2009 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4F0955276B, please check carton labels at receiving, state the required order quantity, and check carton labels at receiving. Packing instructions should state the required order quantity, check carton labels at receiving, and state the required order quantity. Before dispatch, check carton labels at receiving and state the required order quantity.
Frequently Asked Questions
Can 4F0955276B fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-058, the approval should verify the required left or right installation side. The same item record should also compare product photographs with the removed part from several angles.
Does the finish specification matter for 4F0955276B?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. On the listed AUDI A6 2009, technicians should inspect the molded tabs for cracks or distortion. A workshop comparison should additionally review the spring-loaded return features where fitted.
How should 4F0955276B be packed for export?
The front right headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For the right-side order line, request moisture protection for sea freight. The order review should further use dividers to prevent caps from rubbing each other.
Are clips, hoses or fasteners supplied with 4F0955276B?
The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. The product-specific check for 4F0955276B should confirm whether the visible cover needs a primed or finished surface. Receiving staff should also state the requested delivery schedule.
What information should accompany a 4F0955276B enquiry?
Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. Before this headlight washer nozzle cover is accepted, confirm whether the visible cover needs a primed or finished surface. Before approval, the buyer or technician should list model years and bumper versions for mixed orders.
