4F0955276 Front Right Headlight Washer Nozzle Cover for AUDI A6 2005
Primary OE reference: 4F0955276
Cross-reference number 1: 4F0 955 276
Cross-reference number 2: 4F0955276
Product type: Front Right Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2005
Installation position: Front bumper / headlight washer area
Side: Right
Brand: AUDI
Model: A6
Model year: 2005
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-062
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4F0955276 Front Right Headlight Washer Nozzle Cover Product Overview
The component shown under 4F0955276 is a front right headlight washer nozzle cover intended for AUDI A6 2005. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4F0955276 should be confirmed against AUDI A6 2005 and the right installation side. The review should check whether the original cover is supplied separately from its support, check whether the bumper is standard or sport specification, and inspect the bumper cutout shape and surrounding contour. Use the removed part and product photographs to confirm the front bumper option before ordering, confirm the destination-market equipment specification, and compare the nozzle travel direction with the vehicle-side installation; finally, separate mirrored left and right items during inventory selection and check the production date where model-year transitions overlap.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-062 should be checked separately. For this headlight washer nozzle cover, check the joint between the visible cap and hidden support, inspect narrow plastic tips before installation, and compare the retracted position with the bumper surface. A direct comparison with the removed part should additionally review the sealing area around the hose connection, check the complete supplied scope against the photographs, and inspect the rear reinforcement ribs. Before the item is accepted, compare the visible bumper-side contour and review the left-to-right mirrored geometry.
OE Identification and Side Confirmation
4F0955276 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-062 is the internal item code. Match both references to the vehicle record, then check whether the original cover is supplied separately from its support. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-062 begins before the bumper area is disturbed: protect the painted bumper surface during removal and use hand pressure rather than levering narrow plastic tabs. During trial fitting, support the bumper cover while accessing the hidden actuator, disconnect the fluid hose without twisting the plastic spigot, and verify that the cover closes without rubbing the bumper. Before returning the vehicle to service, verify that the cap remains attached through a full washer cycle, transfer reusable clips only after checking their condition, and test for drips after the washer pump stops.
Receiving Inspection
When AD02010-062 arrives, receiving staff should compare the visible surface texture with the ordered specification, check the carton partition for evidence of part-to-part contact, and inspect the visible cover face for scratches or pressure marks. Before workshop release, inspect the rear locator shape without forcing any movable section, confirm the bumper-facing edge has not been compressed in transit, check the actuator body for straightness before trial installation, and document any shortage before the receiving inspection is closed. Complete the inspection by ensuring that staff check molded tabs for whitening, cracks or transport stress, confirm that loose accessories are identified on the packing list, and photograph the received item if the vehicle fitment is still pending.
Product Technical Specifications
| Product type | Front Right Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4F0955276 |
| Cross-reference numbers | 4F0 955 276 4F0955276 |
| Internal item code | AD02010-062 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2005 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Right |
| Applicable vehicle | AUDI A6 2005 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4F0955276, please list model years and bumper versions for mixed orders, confirm whether caps and nozzles should be supplied as pairs, and check carton labels at receiving. Packing instructions should provide the consignee and freight-forwarder details, state the requested delivery schedule, and request a packing-list breakdown by internal item code. Before dispatch, verify the packed quantity by OE reference and identify painted and unpainted variants on separate lines.
Frequently Asked Questions
Can 4F0955276 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. For item AD02010-062, the approval should compare the actuator orientation behind the bumper cover. The same item record should also compare product photographs with the removed part from several angles.
What should be inspected when 4F0955276 arrives?
Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. On the listed AUDI A6 2005, technicians should review the production finish against the approved sample. A workshop comparison should additionally compare connector depth and hose angle with the retained original part.
Is a sample order available for 4F0955276?
Sample and wholesale arrangements can be discussed after the OE reference, application, side, quantity and shipping destination are provided. For the right-side order line, list model years and bumper versions for mixed orders. The order review should further use dividers to prevent caps from rubbing each other.
Does the finish specification matter for 4F0955276?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. The product-specific check for 4F0955276 should check the complete supplied scope against the photographs. Receiving staff should also check the fluid inlet for storage contamination.
Is 4F0955276 a complete headlight washer system?
No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, state the requested delivery schedule. Before approval, the buyer or technician should verify the packed quantity by OE reference.
