4F0955275 Front Left Headlight Washer Nozzle Cover for AUDI A6 2005
Primary OE reference: 4F0955275
Cross-reference number 1: 4F0 955 275
Cross-reference number 2: 4F0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2005
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2005
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-061
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4F0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4F0955275 is a front left headlight washer nozzle cover intended for AUDI A6 2005. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4F0955275 should be confirmed against AUDI A6 2005 and the left installation side. The review should compare the hose connection or cover hinge with the original part, review painted, primed and unpainted finish requirements, and check whether the original cover is supplied separately from its support. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, confirm the destination-market equipment specification, and verify that the OE reference is not for the opposite side; finally, confirm that the listed model designation matches the vehicle and use the full OE number, not a partial family reference.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-061 should be checked separately. For this headlight washer nozzle cover, compare the depth of the actuator body, inspect the actuator barrel for impact damage, and check the cap hinge or retaining point. A direct comparison with the removed part should additionally review the sealing area around the hose connection, compare the cap perimeter and corner radii, and inspect the telescopic body for smooth movement. Before the item is accepted, check whether the visible part requires painting and review the bracket stiffness and screw seats.
OE Identification and Side Confirmation
4F0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-061 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-061 begins before the bumper area is disturbed: check that the washer unit is fully seated in its guide and trial-fit the component before final fastening. During trial fitting, check that the washer unit is fully seated in its guide, trial-fit the component before final fastening, and check that the washer unit is fully seated in its guide. Before returning the vehicle to service, trial-fit the component before final fastening, check that the washer unit is fully seated in its guide, and trial-fit the component before final fastening.
Receiving Inspection
When AD02010-061 arrives, receiving staff should check the spring-return area where the component includes an actuator, record carton damage before the item is moved to workshop stock, and compare connector depth and hose angle with the retained original part. Before workshop release, photograph the received item if the vehicle fitment is still pending, check the cap hinge or retaining point for free movement, check the actuator body for straightness before trial installation, and review the production finish against the approved sample. Complete the inspection by ensuring that staff check the carton partition for evidence of part-to-part contact, inspect the fluid passage only with clean, non-damaging tools, and match the item label to the purchase order and OE reference.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4F0955275 |
| Cross-reference numbers | 4F0 955 275 4F0955275 |
| Internal item code | AD02010-061 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2005 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2005 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4F0955275, please confirm the acceptable delivery window, provide the consignee and freight-forwarder details, and protect hose spigots and projecting tabs. Packing instructions should identify painted and unpainted variants on separate lines, request moisture protection for sea freight, and confirm sample requirements before a bulk order. Before dispatch, protect each nozzle outlet from dust during transit and confirm pallet requirements for larger quantities.
Frequently Asked Questions
Should the washer system be tested after fitting 4F0955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For item AD02010-061, the approval should test the spray direction before returning the vehicle. The same item record should also inspect the bumper opening after the trial fit.
Which vehicle application is listed for 4F0955275?
4F0955275 is listed for AUDI A6 2005. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. On the listed AUDI A6 2005, technicians should compare the actuator orientation behind the bumper cover. A workshop comparison should additionally compare the actuator orientation behind the bumper cover.
Is workshop installation recommended for 4F0955275?
Yes. A qualified workshop can access the bumper area on the A6, transfer hoses or clips safely and test the washer system for correct operation and leaks. For the left-side order line, keep dirt out of open washer-fluid lines. The order review should further verify that the cover closes without rubbing the bumper.
Why must left and right versions of 4F0955275 be distinguished?
Headlight washer components are normally side-specific. Their bumper contours, hose angles, tabs and nozzle directions should not be assumed interchangeable. The product-specific check for 4F0955275 should review any paint-preparation requirement before fitting. Receiving staff should also review the bracket stiffness and screw seats.
Can 4F0955275 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. Before this headlight washer nozzle cover is accepted, confirm the destination-market equipment specification. Before approval, the buyer or technician should confirm that the vehicle is equipped with a factory headlight washer system.
