4B0955276 Front Right Headlight Washer Nozzle Cover for AUDI A6 2002

4B0955276 Front Right Headlight Washer Nozzle Cover Product Overview

The component shown under 4B0955276 is a front right headlight washer nozzle cover intended for AUDI A6 2002. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the right orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for A6

Compatibility for 4B0955276 should be confirmed against AUDI A6 2002 and the right installation side. The review should compare product photographs with the removed part from several angles, use the full OE number, not a partial family reference, and confirm that the vehicle is equipped with a factory headlight washer system. Use the removed part and product photographs to check whether the bumper is standard or sport specification, confirm the destination-market equipment specification, and check the production date where model-year transitions overlap; finally, compare the actuator orientation behind the bumper cover and review painted, primed and unpainted finish requirements.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of AD02010-123 should be checked separately. For this headlight washer nozzle cover, check the cap hinge or retaining point, review the spring-loaded return features where fitted, and compare the distance between mounting points. A direct comparison with the removed part should additionally inspect the actuator barrel for impact damage, check the complete supplied scope against the photographs, and review the clip geometry on the rear face. Before the item is accepted, compare the depth of the actuator body and inspect the washer outlet for blockage.

OE Identification and Side Confirmation

4B0955276 is the primary OE identity for this right front right headlight washer nozzle cover, while AD02010-123 is the internal item code. Match both references to the vehicle record, then check the washer jet position relative to the headlamp lens. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-123 begins before the bumper area is disturbed: inspect nearby wiring and sensors before refitting trim and confirm that no hose is pinched behind the bumper. During trial fitting, confirm that the nozzle extends and retracts freely, confirm sufficient clearance behind the bumper, and inspect the bumper opening after the trial fit. Before returning the vehicle to service, route the washer hose away from sharp edges, keep dirt out of open washer-fluid lines, and photograph the original routing before disassembly.

Receiving Inspection

When AD02010-123 arrives, receiving staff should compare left and right orientation before removing protective wrapping, check the carton partition for evidence of part-to-part contact, and retain the OE label until the washer system has passed its function test. Before workshop release, verify the cover contour against the approved product photograph, document any shortage before the receiving inspection is closed, separate mirrored components immediately after carton opening, and check the spring-return area where the component includes an actuator. Complete the inspection by ensuring that staff verify the nozzle head returns smoothly without applying excess force, check the cap hinge or retaining point for free movement, and inspect the rear locator shape without forcing any movable section.

Product Technical Specifications

Wholesale Supply and Protective Packing

For a quotation or repeat order of 4B0955276, please verify the packed quantity by OE reference, request export-carton dimensions before freight booking, and verify the packed quantity by OE reference. Packing instructions should request export-carton dimensions before freight booking, verify the packed quantity by OE reference, and request export-carton dimensions before freight booking. Before dispatch, verify the packed quantity by OE reference and request export-carton dimensions before freight booking.

Frequently Asked Questions

Which side uses 4B0955276?

This front right headlight washer nozzle cover is catalogued for the right side of the front bumper. Opposite-side washer parts normally use mirrored geometry and a different OE reference. For item AD02010-123, the approval should check each molded locator against the original component. The same item record should also check the cap hinge or retaining point.

Are clips, hoses or fasteners supplied with 4B0955276?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. On the listed AUDI A6 2002, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally protect hose spigots and projecting tabs.

What should be inspected when 4B0955276 arrives?

Check the item label, side, contour, tabs, fluid connection, supplied components and carton condition before fitting or discarding the packaging. For the right-side order line, inspect the fluid passage only with clean, non-damaging tools. The order review should further review the production finish against the approved sample.

Should the washer system be tested after fitting 4B0955276?

Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. The product-specific check for 4B0955276 should confirm that the nozzle extends and retracts freely. Receiving staff should also verify that the cover closes without rubbing the bumper.

How should 4B0955276 be checked before installation?

Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. Before this headlight washer nozzle cover is accepted, compare the actuator orientation behind the bumper cover. Before approval, the buyer or technician should compare the actuator orientation behind the bumper cover.