4B0955275 Front Left Headlight Washer Nozzle Cover for AUDI A6 2002
Primary OE reference: 4B0955275
Cross-reference number 1: 4B0 955 275
Cross-reference number 2: 4B0955275
Product type: Front Left Headlight Washer Nozzle Cover
Vehicle application: AUDI A6 2002
Installation position: Front bumper / headlight washer area
Side: Left
Brand: AUDI
Model: A6
Model year: 2002
Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.
Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.
Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.
Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.
Internal item code: AD02010-122
Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.
4B0955275 Front Left Headlight Washer Nozzle Cover Product Overview
The component shown under 4B0955275 is a front left headlight washer nozzle cover intended for AUDI A6 2002. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.
Fitment and Washer-System Application for A6
Compatibility for 4B0955275 should be confirmed against AUDI A6 2002 and the left installation side. The review should compare the nozzle travel direction with the vehicle-side installation, verify nearby parking-sensor or trim interfaces, and match the connector and fluid inlet position where applicable. Use the removed part and product photographs to confirm that the listed model designation matches the vehicle, compare every tab, clip seat and locating shoulder, and check whether the original cover is supplied separately from its support; finally, review body-style differences within the same model generation and compare product photographs with the removed part from several angles.
Headlight Washer Nozzle Cover Function and Design Notes
The visible and hidden interfaces of AD02010-122 should be checked separately. For this headlight washer nozzle cover, inspect the hose connector for ovality, compare the visible bumper-side contour, and review the clip geometry on the rear face. A direct comparison with the removed part should additionally check the fluid inlet for storage contamination, inspect the rear reinforcement ribs, and compare the support flange width. Before the item is accepted, review the bracket stiffness and screw seats and check the complete supplied scope against the photographs.
OE Identification and Side Confirmation
4B0955275 is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-122 is the internal item code. Match both references to the vehicle record, then compare the actuator orientation behind the bumper cover. Do not substitute the mirrored side merely because the visible cover shape appears similar.
Installation and System Testing Guidance
Workshop preparation for AD02010-122 begins before the bumper area is disturbed: replace distorted clips or damaged seals and check that the washer unit is fully seated in its guide. During trial fitting, confirm that no hose is pinched behind the bumper, align the cover flush with the bumper surface, and verify that the cap remains attached through a full washer cycle. Before returning the vehicle to service, reconnect every hose clip before filling the system, complete a final visual check under even lighting, and confirm that the nozzle extends and retracts freely.
Receiving Inspection
When AD02010-122 arrives, receiving staff should compare the supplied side with the vehicle repair order, retain the OE label until the washer system has passed its function test, and check molded tabs for whitening, cracks or transport stress. Before workshop release, compare the visible surface texture with the ordered specification, verify the cover contour against the approved product photograph, review the production finish against the approved sample, and record carton damage before the item is moved to workshop stock. Complete the inspection by ensuring that staff document any shortage before the receiving inspection is closed, inspect mounting holes for flash, blockage or edge damage, and protect the visible face again after inspection is complete.
Product Technical Specifications
| Product type | Front Left Headlight Washer Nozzle Cover |
|---|---|
| Primary OE reference | 4B0955275 |
| Cross-reference numbers | 4B0 955 275 4B0955275 |
| Internal item code | AD02010-122 |
| Vehicle brand | AUDI |
| Vehicle model | A6 |
| Model year | 2002 |
| Installation position | Front bumper / headlamp washer area |
| Side / orientation | Left |
| Applicable vehicle | AUDI A6 2002 |
Wholesale Supply and Protective Packing
For a quotation or repeat order of 4B0955275, please confirm pallet requirements for larger quantities, provide the complete destination address or port, and confirm whether caps and nozzles should be supplied as pairs. Packing instructions should confirm sample approval before mass shipment, request protective inner wrapping for painted faces, and confirm the preferred incoterm. Before dispatch, identify painted and unpainted variants on separate lines and list model years and bumper versions for mixed orders.
Frequently Asked Questions
Does the finish specification matter for 4B0955275?
Yes. A visible headlight washer nozzle cover may be primed, painted or textured for a specific bumper version. Compare the original surface and colour requirements before installation. For item AD02010-122, the approval should compare the distance between mounting points. The same item record should also check the nozzle outlet orientation.
Can 4B0955275 fit every A6 model year?
No. Styling changes and market equipment can alter washer locations and mounting geometry. Use the listed year and full OE number as the starting point for confirmation. On the listed AUDI A6 2002, technicians should check whether the bumper is standard or sport specification. A workshop comparison should additionally compare every tab, clip seat and locating shoulder.
Should the washer system be tested after fitting 4B0955275?
Yes. Check nozzle movement, cap closure, spray direction, hose routing and leakage before the bumper-area repair is completed. For the left-side order line, test the spray direction before returning the vehicle. The order review should further verify that the cover closes without rubbing the bumper.
How should 4B0955275 be checked before installation?
Compare the OE number, side, mounting points, bumper contour, hose connection and supplied scope with the removed washer component before fitting. The product-specific check for 4B0955275 should compare product photographs with the removed part from several angles. Receiving staff should also compare the actuator orientation behind the bumper cover.
Can product photographs alone confirm 4B0955275 compatibility?
Photographs are useful for visual comparison, but the full OE number, vehicle year, bumper version, side and washer equipment must also match. Before this headlight washer nozzle cover is accepted, check whether the original cover is supplied separately from its support. Before approval, the buyer or technician should verify the required left or right installation side.
