3M5H18456-AB Blower Motor for FORD C-Max
Primary OE reference: 3M5H18456-AB
Cross-reference 1: DV6Z-19805CB
Cross-reference 2: DV6Z-19805C
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD C-Max
Brand: FORD
Model: C-Max
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
3M5H18456-AB Automotive Blower Motor Overview
The 3M5H18456-AB record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-038, When the climate-control circuit commands 3M5H18456-AB airflow, the electric motor rotates the 3M5H18456-AB fan wheel inside the HVAC housing. Use 6203-038 when comparing this 3M5H18456-AB airflow configuration.
OE Reference and Application
The primary catalogue number is 3M5H18456-AB. The recorded application is FORD C-Max. For 6203-038, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-038 with the approved OE reference.
HVAC Interface and 3M5H18456-AB installation
During work on 6203-038, If 3M5H18456-AB airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 3M5H18456-AB motor is the only cause. Recheck 6203-038 before the lower trim is closed.
For item 6203-038, confirm that the 3M5H18456-AB centrifugal wheel clears its housing and that the 6203-038 connector lock engages without force. After seating 6203-038, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-038.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 3M5H18456-AB |
| Cross-reference numbers | DV6Z-19805CB / DV6Z-19805C |
| Vehicle brand | FORD |
| Vehicle model | C-Max |
| Model year | Confirm by OE reference |
| 3M5H18456-AB installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-038, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-038 record remains the picking reference.
For trade item 6203-038, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-038 on the packing instruction.
Frequently Asked Questions
How should item 6203-038 and blower number 3M5H18456-AB be verified?
Match 6203-038 to the complete 3M5H18456-AB marking, then compare the 6203-038 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-038 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-038; confirm steering position, climate-control specification and the original 6203-038 geometry before approval.
What circuit checks are useful when 6203-038 does not operate?
For 6203-038, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-038 motor again.
Which details should accompany a wholesale request for 6203-038?
Provide item 6203-038, OE 3M5H18456-AB, the stated application, quantity and destination; add 6203-038 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-038?
Clear debris from the air inlet, check that the 6203-038 wheel turns freely, seat the 6203-038 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-038: Send 3M5H18456-AB, the 6203-038 application and required quantity for a fitment and supply review.
