3M51-R22601-BD Left Interior Door Handle for 2005 Ford Focus

Left Interior Door Handle Application

Specified for 2005 FORD Focus, component 3M51-R22601-BD performs the left interior door handle role at the left-side interior door release position. Its application is defined by position and interface, not simply by a similar outer silhouette.

Visible Profile and Component Identity

Visible evidence includes left-oriented interior release lever and mounting frame. The black housing with silver pull lever is shown for identification, while final approval should rely on the reverse details.

Product-Specific Selection Notes

The left interior handle is identified by its cable approach and the direction in which the silver lever opens. The back of the assembly provides a better side check than the front face. Ensure the return spring moves freely before the panel is reassembled.

Surface and Workshop Handling

For 3M51-R22601-BD, protect the visible black housing with silver pull lever during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.

Latch or Electrical Interface

Before tightening FD02037-009, inspect the latch rod or cable end, pivot pin and return spring for wear. The handle should move the latch through its full travel without side-loading the carrier or scraping the surrounding panel.

Related System Diagnosis

If FD02037-009 has excessive free travel, inspect the interior cable sheath, retaining ferrule and latch return before condemning 3M51-R22601-BD. A sound handle cannot compensate for a stretched cable or a partially seized door latch.

Packaging for Trade Orders

For bulk packing, place FD02037-009 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark left-side interior door release position on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.

Vehicle and Position Confirmation

Compare lever direction, cable attachment and screw-tab layout with the removed left interior handle. For 3M51-R22601-BD, confirm 2005 production timing and the left-side interior door release position designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.

Automotive Replacement Part Specifications

Installation and Functional Check

Connect the release cable first, verify lever return and then secure the surrounding door trim. Once 3M51-R22601-BD is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.

Receiving and Trade Supply

A trade enquiry for FD02037-009 should state 3M51-R22601-BD / 1470113, 2005 FORD Focus, left-side interior door release position, the required finish and order quantity. Receiving staff can identify this exact line by comparing left-oriented interior release lever and mounting frame with the delivered item.

Frequently Asked Questions

What is the intended position of 3M51-R22601-BD?

Its intended location is the left-side interior door release position on the listed 2005 FORD Focus.

How can incoming stock be screened?

Compare left-oriented interior release lever and mounting frame and the black housing with silver pull lever with the gallery.

Are similar-looking parts automatically equivalent?

No. Equivalence requires matching the mechanism, fixing pattern and any lock or electrical provision.

Which checks follow installation?

Operate the part repeatedly and confirm that it settles flush without loading the trim.

What details are needed for export supply?

Provide 3M51-R22601-BD / 1470113, code FD02037-009, application, position, quantity, destination and packing needs.