3M51-R22600-BD Right Interior Door Handle for 2005 Ford Focus

Right Interior Door Handle Application

Built around OE reference 3M51-R22600-BD, this right interior door handle serves the right-side interior door release position of the 2005 FORD Focus. Selection depends on that exact location and the photographed attachment geometry.

Visible Profile and Component Identity

In the supplied views, right-hand interior release assembly with cable receiver is the quickest visual identifier. Its black carrier with silver pull lever should be judged together with the hidden carrier rather than as a colour-only match.

Product-Specific Selection Notes

Although the right handle resembles the left part from the front, the cable receiver and carrier are mirrored. Place both assemblies back-to-back when checking stock. The lever should return smoothly without contacting the black surround at either end of its travel.

Surface and Workshop Handling

For 3M51-R22600-BD, protect the visible black carrier with silver pull lever during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.

Latch or Electrical Interface

Before tightening FD02037-010, inspect the latch rod or cable end, pivot pin and return spring for wear. The handle should move the latch through its full travel without side-loading the carrier or scraping the surrounding panel.

Related System Diagnosis

If FD02037-010 has excessive free travel, inspect the interior cable sheath, retaining ferrule and latch return before condemning 3M51-R22600-BD. A sound handle cannot compensate for a stretched cable or a partially seized door latch.

Packaging for Trade Orders

For bulk packing, place FD02037-010 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark right-side interior door release position on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.

Vehicle and Position Confirmation

Confirm the mirrored lever direction, mounting ears and cable seat match the passenger-side unit. For 3M51-R22600-BD, confirm 2005 production timing and the right-side interior door release position designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.

Automotive Replacement Part Specifications

Installation and Functional Check

Attach the cable without kinking it and cycle the latch several times before installing the trim panel. Once 3M51-R22600-BD is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.

Receiving and Trade Supply

A trade enquiry for FD02037-010 should state 3M51-R22600-BD / 1470111, 2005 FORD Focus, right-side interior door release position, the required finish and order quantity. Receiving staff can identify this exact line by comparing right-hand interior release assembly with cable receiver with the delivered item.

Frequently Asked Questions

Where is 3M51-R22600-BD used?

3M51-R22600-BD is listed at the right-side interior door release position of 2005 FORD Focus as a right interior door handle.

How is this right interior door handle recognised?

Look for right-hand interior release assembly with cable receiver and compare the pictured black carrier with silver pull lever.

Is the opposite side interchangeable?

Treat the opposite side as a separate part because its pivot, linkage and visible orientation may be mirrored.

What is checked after fitting 3M51-R22600-BD?

Cycle the latch or switch, confirm free return and inspect the surrounding panel gap.

What should a buyer quote?

Send 3M51-R22600-BD, internal code FD02037-010, the vehicle, position, finish, quantity and destination.