35281 Blower Motor for FORD F-250
Primary OE reference: 35281
Cross-reference 1: 6L7Z19805A
Cross-reference 2: F75Z19805DA
Cross-reference 3: F75Z19805EA
Cross-reference 4: F7519805FA
Product type: Automotive HVAC Blower Motor
Applicable vehicle: FORD F-250
Brand: FORD
Model: F-250
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
35281 Automotive Blower Motor Overview
The 35281 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6203-130, When the climate-control circuit commands 35281 airflow, the electric motor rotates the 35281 fan wheel inside the HVAC housing. Use 6203-130 when comparing this 35281 airflow configuration.
OE Reference and Application
The primary catalogue number is 35281. The recorded application is FORD F-250. For 6203-130, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6203-130 with the approved OE reference.
HVAC Interface and 35281 installation
During work on 6203-130, If 35281 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 35281 motor is the only cause. Recheck 6203-130 before the lower trim is closed.
For item 6203-130, confirm that the 35281 centrifugal wheel clears its housing and that the 6203-130 connector lock engages without force. After seating 6203-130, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-130.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 35281 |
| Cross-reference numbers | 6L7Z19805A / F75Z19805DA / F75Z19805EA / F7519805FA |
| Vehicle brand | FORD |
| Vehicle model | F-250 |
| Model year | Confirm by OE reference |
| 35281 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6203-130, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6203-130 record remains the picking reference.
For trade item 6203-130, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6203-130 on the packing instruction.
Frequently Asked Questions
How should item 6203-130 and blower number 35281 be verified?
Match 6203-130 to the complete 35281 marking, then compare the 6203-130 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.
Can 6203-130 have more than one vehicle-side blower configuration?
Yes. FORD production changes can affect 6203-130; confirm steering position, climate-control specification and the original 6203-130 geometry before approval.
What circuit checks are useful when 6203-130 does not operate?
For 6203-130, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-130 motor again.
Which details should accompany a wholesale request for 6203-130?
Provide item 6203-130, OE 35281, the stated application, quantity and destination; add 6203-130 carton or private-label requirements separately.
How can noise be avoided after fitting 6203-130?
Clear debris from the air inlet, check that the 6203-130 wheel turns freely, seat the 6203-130 flange evenly and keep wiring away from the impeller.
Request a quote for 6203-130: Send 35281, the 6203-130 application and required quantity for a fitment and supply review.
