34550-T7J-H01 Rear Bumper Light for HONDA Vezel 2014 Left
Primary OE reference: 34550-T7J-H01
Product type: Rear Bumper Light
Applicable vehicle: HONDA Vezel 2014
Installation position: Rear bumper / reflector opening
Side / orientation: Left
Brand: HONDA
Model: Vezel
Vehicle year: 2014
Bumper interface: Review the corner radius, edge return and rear fastening points against the original bumper opening.
Product function: Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.
Connector review: Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Fitting note: Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Selection context: Production date and regional bumper specification should be reviewed when several near-identical versions are available.
Post-fit check: Make sure the component does not touch hot exhaust trim or trap wiring against a sharp body edge.
Trade-order details: Send front and rear photographs when the bumper uses several visually similar lens or wiring configurations.
Packing reference: Projecting tabs should be supported with shaped material instead of carrying the weight of other products.
34550-T7J-H01 Rear Bumper Light Overview
This product is listed for HONDA Vezel 2014 at the left rear-bumper position. This component completes the rear bumper lighting area and must match the correct side, lens type and vehicle trim.
A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.
At the left rear-bumper position, align each locating tab with the matching slot before applying hand pressure to preserve access for a final electrical test where a lamp circuit is present.
Vehicle Fitment and Bumper Interface
Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.
Use the removed component as the physical reference for outer shape, housing projection and clip location.
When reviewing the 2014 vehicle, check whether the original component uses a separate retainer or an integral locking tab to reduce clip damage during a no-force trial installation.
For the HONDA Vezel application, verify the fastener direction and the shape of the concealed support frame to prevent a visually similar version from sitting proud of the bumper.
Reflector, Lens and Electrical Configuration
Confirm separately whether the removed component uses wiring, a bulb holder or an integrated LED module.
Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.
For this Vezel body configuration, protect the visible surface until the full perimeter gap has been accepted before the packaging and carton marking are finalized.
Before approving the Vezel part for packing, review the reflector texture and lens colour in neutral workshop light before inner liners make the rear attachment points difficult to inspect.
Installation and Functional Check
Check the mounting direction and side before installation; left and right components are not automatically interchangeable.
Verify that bumper movement does not load the lens and that the component remains fully clipped at every corner.
Before fitting the left unit, record the approved side and vehicle application for repeat-order identification so the visible gap remains even after every retaining point is engaged.
While the HONDA bumper opening is accessible, confirm that the cable exit, where fitted, clears the bumper reinforcement so the lens and housing are supported without distortion.
Automotive Lighting Product Specifications
| Product type | Rear Bumper Light |
|---|---|
| Primary OE reference | 34550-T7J-H01 |
| Cross-reference numbers | 34550-T7J-H01 |
| Internal item code | HD04004-088 |
| Vehicle brand | HONDA |
| Vehicle model | Vezel |
| Model year | 2014 |
| Installation position | Rear bumper / reflector opening |
| Side / orientation | Left |
| Configuration | Match the photographed reflector or powered-lamp version |
Wholesale Supply and Protective Packing
For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.
Side-specific labels reduce picking mistakes during consolidation of mixed bumper-light orders.
During comparison of the HONDA rear component, confirm that any connector seal remains square when the housing is fully seated so a passive reflector is not confused with an illuminated assembly.
For a repeat order of the left version, use the opposite-side component only as an alignment reference, not as an interchange part to verify that the photographed configuration matches the vehicle in the workshop.
Frequently Asked Questions
Can appearance alone confirm compatibility?
No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.
Why can the same model year use another version?
Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.
How should the visible lens be packed?
Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.
Can the opposite side use the same part?
Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.
How is a passive reflector checked?
Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.
Request a Product-Specific Quote
The quotation can include export packing requirements once the required variant and order volume are known.
