34409 Blower Motor for KIA
Primary OE reference: 34409
Cross-reference 1: 0K2AG61B10
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA
Brand: KIA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
34409 Automotive Blower Motor Overview
The 34409 record is prepared for application-specific HVAC blower replacement and wholesale quotation.
For catalogue item 6201-044, When the climate-control circuit commands 34409 airflow, the electric motor rotates the 34409 fan wheel inside the HVAC housing. Use 6201-044 when comparing this 34409 airflow configuration.
OE Reference and Application
The primary catalogue number is 34409. The recorded application is KIA. For 6201-044, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6201-044 with the approved OE reference.
HVAC Interface and 34409 installation
During work on 6201-044, If 34409 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 34409 motor is the only cause. Recheck 6201-044 before the lower trim is closed.
For item 6201-044, confirm that the 34409 centrifugal wheel clears its housing and that the 6201-044 connector lock engages without force. After seating 6201-044, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-044.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 34409 |
| Cross-reference numbers | 0K2AG61B10 |
| Vehicle brand | KIA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 34409 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-044, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6201-044 record remains the picking reference.
For trade item 6201-044, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6201-044 on the packing instruction.
Frequently Asked Questions
How should item 6201-044 and blower number 34409 be verified?
Match 6201-044 to the complete 34409 marking, then compare the 6201-044 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-044 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-044; confirm steering position, climate-control specification and the original 6201-044 geometry before approval.
What circuit checks are useful when 6201-044 does not operate?
For 6201-044, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-044 motor again.
Which details should accompany a wholesale request for 6201-044?
Provide item 6201-044, OE 34409, the stated application, quantity and destination; add 6201-044 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-044?
Clear debris from the air inlet, check that the 6201-044 wheel turns freely, seat the 6201-044 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-044: Send 34409, the 6201-044 application and required quantity for a fitment and supply review.
