34399 Blower Motor for KIA
Primary OE reference: 34399
Product type: Automotive HVAC Blower Motor
Applicable vehicle: KIA
Brand: KIA
Model: Confirm by OE reference
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.
Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
34399 Automotive Blower Motor Overview
This product entry documents the 34399 blower unit with practical identification and 34399 installation checkpoints.
For catalogue item 6201-041, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 34399 blower important at idle and in traffic. Use 6201-041 when comparing this 34399 airflow configuration.
OE Reference and Application
The primary catalogue number is 34399. The recorded application is KIA. For 6201-041, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6201-041 with the approved OE reference.
HVAC Interface and 34399 installation
During work on 6201-041, After 34399 installation, operate low through high speed and confirm 34399 airflow reaches the selected vents without abnormal vibration. Recheck 6201-041 before the lower trim is closed.
For item 6201-041, confirm that the 34399 centrifugal wheel clears its housing and that the 6201-041 connector lock engages without force. After seating 6201-041, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6201-041.
Automotive HVAC Blower Motor Specifications
| Product type | Automotive HVAC Blower Motor |
|---|---|
| Primary OE reference | 34399 |
| Cross-reference numbers | 34399 |
| Vehicle brand | KIA |
| Vehicle model | Confirm by OE reference |
| Model year | Confirm by OE reference |
| 34399 installation area | Cabin HVAC / heater blower housing |
| Main interfaces | Electrical connector, mounting flange and centrifugal fan wheel |
| Fitment method | OE-number and physical-geometry comparison |
Quality and Trade Supply
For product 6201-041, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6201-041 record remains the picking reference.
For trade item 6201-041, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6201-041 on the packing instruction.
Frequently Asked Questions
How should item 6201-041 and blower number 34399 be verified?
Match 6201-041 to the complete 34399 marking, then compare the 6201-041 plug, terminal count, mounting flange and wheel dimensions with the removed KIA unit.
Can 6201-041 have more than one vehicle-side blower configuration?
Yes. KIA production changes can affect 6201-041; confirm steering position, climate-control specification and the original 6201-041 geometry before approval.
What circuit checks are useful when 6201-041 does not operate?
For 6201-041, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6201-041 motor again.
Which details should accompany a wholesale request for 6201-041?
Provide item 6201-041, OE 34399, the stated application, quantity and destination; add 6201-041 carton or private-label requirements separately.
How can noise be avoided after fitting 6201-041?
Clear debris from the air inlet, check that the 6201-041 wheel turns freely, seat the 6201-041 flange evenly and keep wiring away from the impeller.
Request a quote for 6201-041: Send 34399, the 6201-041 application and required quantity for a fitment and supply review.
